ICF12005A007V Datasheet, PDF (1/16 Pages) TDK Electronics – ICF Series – Non-isolated SMT Power Module

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module
iCF Series DC/DC Power Modules
4.5-14V Input, 3A Output
Surface Mount Power Module
iCF12 power modules perform local voltage conversion from either
a 5V or 12V bus. The iCF12003A007V utilizes a low component
count that results in both a low cost structure and a high level of
performance. The open-frame, compact, surface mountable
design features a low profile and weight as well as additional edge
plated pads that allow for extremely flexible and robust
manufacturing processes.
Features
• Size – 12.2mm x 12.2 mm x 4.45mm
(0.48 in. x 0.48 in. x 0.175 in.)
• DOSA Compatible Footprint
• Edge plated castellations for forming
inspectable solder joints
• Surface mountable
• Maximum weight 1.5g (0.053 oz)
• Up to 16.5W of output power in high
ambient temperature, low airflow
environments with no power derating
• Positive logic on/off
• Starts with pre-biased output
• Output voltage adjustment – industry
standard
• Outstanding transient response
without the need for external loop
tuning components
• Constant switching frequency
• Remote Sense
• Power Good
• Full, auto-recovery protection:
o Input under voltage
o Short circuit
o Thermal limit
• ISO Certified manufacturing facilities
• Patent pending
Optional Features
• Negative logic on/off
• Solder bumping for enhanced
solderability on the EPC footprint
©2010 TDK Innoveta Inc.
iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1
℡ [phone]
1/16