S10K300E2K1 Datasheet, PDF (16/22 Pages) TDK Electronics – SIOV metal oxide varistors

Leaded varistors
AdvanceD-MP, S10 series
B722*
3
Lead configuration
Straight leads are standard for disk varistors. Other lead configurations as crimp style or cus-
tomer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. Crimped leads
(non-standard) are differently crimped for technical reasons; the individual crimp styles are denot-
ed by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below.
The crimp styles of the individual types can be seen from the type designation in the ordering ta-
bles.
3.1 Crimp style mode
Example: B72210S0271K 5 01
|
Digit 13
Digit 13 of ordering code
1
2
3
4
5
Available upon request
Internal coding
Crimp style
Standard, straight leads
S2
S3
S4
S5

Figure
1
2
3
4
5
6
3.2 Standard leads and non-standard crimp styles
Standard, straight leads
Non-standard,
crimp style S2
Non-standard,
crimp style S3
Figure 1
Figure 2
Figure 3
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 22