TL071_16 Datasheet, PDF (5/51 Pages) Texas Instruments – Low-Noise JFET-Input Operational Amplifiers

www.ti.com
TL071, TL071A, TL071B
TL072, TL072A, TL072B, TL074, TL074A, TL074B
SLOS080M – SEPTEMBER 1978 – REVISED JUNE 2015
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) ⁽¹⁾
V_CC+ - V_CC–
V_ID
V_I
T_J
T_stg
Supply voltage⁽²⁾
Differential input voltage⁽³⁾
Input voltage⁽²⁾⁽⁴⁾
Duration of output short circuit⁽⁵⁾
Operating Virtual Junction Temperature
Case temperature for 60 seconds - FK package
Lead temperature 1.8 mm (1/16 inch) from case for 10 seconds
Storage temperature
MIN
MAX
–18
18
–30
30
–15
15
Unlimited
150
260
300
–65
150
UNIT
V
V
V
°C
°C
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the midpoint between V_CC+ and V_CC−.
(3) Differential voltages are at IN+, with respect to IN−.
(4) The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
(5) The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-
C101 ⁽²⁾
VALUE
±2000
±1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
V_CC+
V_CC–
V_CM
T_A
Supply voltage
Supply voltage
Common-mode voltage
Operating free-air temperature
TL07xM
TL08xQ
TL07xI
TL07xA, TL07xB, TL07xC
MIN
5
–5
V_CC– + 4
–55
–40
–40
0
MAX
15
–15
V_CC+ – 4
125
125
85
70
UNIT
V
V
V
°C
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
R_θJA
Junction-to-ambient
thermal resistance
R_θJC(top)
Junction-to-case (top)
thermal resistance
D (SOIC)
8
14
PINS PINS
97
86
—
—
FK
(LCCC)
20
PINS
—
5.61
TL071/TL072/TL074
J (CDIP)
N (PDIP)
8
14
8
14
PINS PINS PINS PINS
—
—
85
80
15.05 14.5 —
—
NS (SO)
8 PINS
14
PINS
PW
(TSSOP)
8 14
PINS PINS
95
76 150 113
—
—
——
UNIT
°C/W
°C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
Copyright © 1978–2015, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: TL071 TL071A TL071B TL072 TL072A TL072B TL074 TL074A TL074B