NUC120VE3AN Datasheet, PDF (303/600 Pages) Nuvotem Talema – NuMicro™ Family NUC100 Series Technical Reference Manual

NuMicro™ NUC100 Series Technical Reference Manual
[17]
[16]
[15:12]
Reserved
CH2EN
Reserved
[11]
CH1MOD
[10]
CH1INV
[9]
Reserved
[8]
CH1EN
[7:6]
Reserved
[5]
DZEN23
[4]
DZEN01
[3]
CH0MOD
[2]
CH0INV
group B)
1 = Inverter enable
0 = Inverter disable
Reserved
PWM-Timer 2 Enable (PWM timer 2 for group A and PWM timer 6 for group B)
1 = Enable corresponding PWM-Timer Start Run
0 = Stop corresponding PWM-Timer Running
Reserved
PWM-Timer 1 Auto-reload/One-Shot Mode (PWM timer 1 for group A and PWM
timer 5 for group B)
1 = Auto-load Mode
0 = One-Shot Mode
Note: If there is a rising transition at this bit, it will cause CNR1 and CMR1 be clear.
PWM-Timer 1 Output Inverter Enable (PWM timer 1 for group A and PWM timer 5 for
group B)
1 = Inverter enable
0 = Inverter disable
Reserved
PWM-Timer 1 Enable (PWM timer 1 for group A and PWM timer 5 for group B)
1 = Enable corresponding PWM-Timer Start Run
0 = Stop corresponding PWM-Timer Running
Reserved
Dead-Zone 2 Generator Enable (PWM2 and PWM3 pair for PWM group A, PWM6
and PWM7 pair for PWM group B)
1 = Enable
0 = Disable
Note: When Dead-Zone Generator is enabled, the pair of PWM2 and PWM3 becomes
a complementary pair for PWM group A and the pair of PWM6 and PWM7 becomes a
complementary pair for PWM group B.
Dead-Zone 0 Generator Enable (PWM0 and PWM1 pair for PWM group A, PWM4
and PWM5 pair for PWM group B)
1 = Enable
0 = Disable
Note: When Dead-Zone Generator is enabled, the pair of PWM0 and PWM1 becomes
a complementary pair for PWM group A and the pair of PWM4 and PWM5 becomes a
complementary pair for PWM group B.
PWM-Timer 0 Auto-reload/One-Shot Mode (PWM timer 0 for group A and PWM
timer 4 for group B)
1 = Auto-reload Mode
0 = One-Shot Mode
Note: If there is a rising transition at this bit, it will cause CNR0 and CMR0 be clear.
PWM-Timer 0 Output Inverter Enable (PWM timer 0 for group A and PWM timer 4 for
group B)
1 = Inverter enable
- 303 -
Publication Release Date: Oct 22, 2010
Revision V1.06