W77E058A40DL Datasheet, PDF (20/87 Pages) Nuvotem Talema – GENERAL DESCRIPTION

W77E058A
Slave Address 1
Bit:
7
6
5
4
3
2
1
0
Mnemonic: SADDR1
Address: AAh
SADDR1: The SADDR1 should be programmed to the given or broadcast address for serial port 1 to
which the slave processor is designated.
Port 3
Bit:
7
6
5
4
3
2
1
0
P3.7 P3.6 P3.5 P3.4 P3.3 P3.2 P3.1 P3.0
Mnemonic: P3
Address: B0h
P3.7-0: General purpose I/O port. Each pin also has an alternate input or output function. The
alternate functions are described below.
P3.7
P3.6
P3.5
P3.4
P3.3
P3.2
P3.1
P3.0
RD
WR
T1
T0
INT1
INT0
TxD
RxD
Strobe for read from external RAM
Strobe for write to external RAM
Timer/counter 1 external count input
Timer/counter 0 external count input
External interrupt 1
External interrupt 0
Serial port 0 output
Serial port 0 input
Interrupt Priority
Bit:
7
-
Mnemonic: IP
6
5
4
3
2
1
0
PS1 PT2
PS
PT1 PX1 PT0 PX0
Address: B8h
IP.7:
PS1:
PT2:
PS:
PT1:
PX1:
PT0:
PX0:
This bit is un-implemented and will read high.
This bit defines the Serial port 1 interrupt priority. PS = 1 sets it to higher priority level.
This bit defines the Timer 2 interrupt priority. PT2 = 1 sets it to higher priority level.
This bit defines the Serial port 0 interrupt priority. PS = 1 sets it to higher priority level.
This bit defines the Timer 1 interrupt priority. PT1 = 1 sets it to higher priority level.
This bit defines the External interrupt 1 priority. PX1 = 1 sets it to higher priority level.
This bit defines the Timer 0 interrupt priority. PT0 = 1 sets it to higher priority level.
This bit defines the External interrupt 0 priority. PX0 = 1 sets it to higher priority level.
- 20 -