NRH2410TR68NN4 Datasheet, PDF (9/12 Pages) Taiyo Yuden (U.S.A.), Inc – SMD INDUCTORS SMALL AND LARGE CURRENT TYPE

˙ RELIABILITY DATA
8. Resistance to flexure of substrate
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
No damage.
NRH24/30, NRS50/60 Type
NR10050 Type
ʲTest Method and Remarksʳ
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board
reaches to 2 mm.
Test board size
: 100Ê·40Ê·1.0
Force Rod
20
10
Test board material : glass epoxy-resin
R230
Solder cream thickness : 0.12 (BR Series)
0.10 (NR30/40, NRV30, NRH24/30,NRG40)
Board
0.15 (NR50/60/80, NRS50/60)
R5
Test Sample
45ʶ2mm 45ʶ2mm
Land dimensionʢBRC1608ʣ Land dimensionʢBRL2012ʣ Land dimensionʢBRL3225ʣ Land dimensionʢNR30, NRH30, NRV30ʣ Land dimensionʢNR60, NRS60ʣ Land dimensionʢNR, NRS50ʣ
0.9
0.55 0.8 0.55
1.4
0.65 0.9 0.65
2.7
1.0 1.6 1.0
2.7
0.8 1.4 0.8
5.7
1.6 3.1 1.6
4.0
1.5 2.1 1.5
Land dimensionʢ̧̗̘2016ʣ Land dimensionʢBRL2518,BRC2518,BRFL2518ʣ Land dimensionʢNRH24ʣ Land dimensionʢNR40, NRG40ʣ Land dimensionʢNR80ʣ
1.8
0.7 0.8 0.7
1.95
0.65 1.5 0.65
2.0
0.7 0.75 0.7
3.7
1.2 1.6 1.2
1.8 3.8 1.8
7.5
Printed board thickness : 1.0mm
Unit : mm
9. Insulation resistance : between wires
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
10. Insulation resistance : between wire and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
11. Withstanding voltage : between wires and core
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
NR10050 Type
12. Adhesion of terminal electrode
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Shall not come off PC board.
NR10050 Type
ʲTest Method and Remarksʳ
BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :
The test samples shall be soldered to the test board by the reflow.
ɾApplied force
: 10N to X and Y directions.
ɾDuration
: 5s.
ɾSolder cream thickness : 0.15mm.
10N, 5s
BRC1608, NR10050 Type :
ɾApplied force : 5N to X and Y directions.
ɾDuration
: 5s.
13. Resistance to vibration
BRC1608, BRL2012, BRC2016, BRC2518,
BRFL2518, BRL2518, BRL3225 Type
NR30/40/50/60/80, NRV30, NRG40,
NRH24/30, NRS50/60 Type
Inductance change : Within ʶ10%
No significant abnormality in appearance.
NR10050 Type
ʲTest Method and Remarksʳ
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Frequency Range
Total Amplitude
Sweeping Method
Time
10ʙ55Hz
1.5mm (May not exceed acceleration 196m/s²)
10Hz to 55Hz to 10Hz for 1min.
X
Y
For 2 hours on each X, Y, and Z axis.
Z
Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.
ˎ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli_e-01

wound0407_reli-RP2