NR3010T1R0N Datasheet, PDF (14/15 Pages) Taiyo Yuden (U.S.A.), Inc – SMD INDUCTORS LOW PROFILE TYPE

RELIABILITY DATAɹ
4/4
Item
18.Loading under damp
heat
Specifled Value
BRC1608, BRL2012, BRC2016,
BRL2518, BRL3225
Type
NRH24, NR30/40/60/80,
NRG40 Type
Inductance changeɿWithinʶ10ˋ
No significant abnormality in appearance.
ɹɹɹ
19.Low temperature life test _{Inductance changeɿWithinʶ10ˋ}
No significant abnormality in appearance.
NR10050 Type
Test Method and Remarks
B R C 1 6 0 8 , B R L 2 0 1 2 , B R C 2 0 1 6 , B R L 2 5 1 8 , B R L 3 2 2 5 Ty p e É¿
Temperature
60ʶ2ˆ
Humidity
90ʙ95ˋRH
Applied current Rated current
Time
1000hours.
Recoveryɿ At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
5
within 48 hrs.
NRH24, NR30/40/60/80, NRG40Type, NR10050 Typeɿ
The test samples shall be soldered to the test board
by the reflow.
The test samples shall be placed in thermostatic oven
set at specified temperature and humidity and applied
the rated current continuously as shown in below
table.
Temperature
Humidity
Applied current
Time
60ʶ2ˆ
90ʙ95ˋRH
Rated current
500ʶ2hour
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Typeɿ
Temperature
ʔ40ʶ2ˆ
Duration
1000hours
Recoveryɿ At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
NRH24, NR30/40/60/80, NRG40Type, NR10050 Typeɿ
The test samples shall be soldered to the test board
by the reflow.
After that, the test samples shall be placed at test
conditions as shown in below table.
Temperature
ʵ40ʶ3ˆ
Time
500ʶ24hour
20.High temperature life
test
Inductance changeɿ
Withinʶ10ˋ
No significant abnormality in
appearance.
Inductance changeɿ
B R C 1 6 0 8 , B R L 2 0 1 2 , B R C 2 0 1 6 , B R L 2 5 1 8 , B R L 3 2 2 5 Ty p e É¿
Withinʶ10ˋ
Temperature
85ʶ2ˆ
No significant abnormality in
Duration
1000hours
appearance.
Recoveryɿ At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
NR10050 Typeɿ
Temperature
105ʶ3ˆ
Time
500ʶ24hour
Recoveryɿ At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
21.Loading at high
temperature life test
Inductance changeɿ
Withinʶ10ˋ
No significant abnormality in
appearance.
NRH24, NR30/40/60/80, NRG40Typeɿ
The test samples shall be soldered to the test board
by the reflow soldering
Temperature
85ʶ2ˆ
Applied current Rated current
Time
500ʶ24hour
22.Standard condition
Standard test condition ɿ Unless otherwise specified, temperature is 20ʶ15ˋ and 65ʶ20ˋof
relative humidity.
When there are question concerning measurement result : In order to provide correlation date, the
test shall be condition of 20ʶ2ˆ of temperature, 65ʶ5% relative humidity.
Inductance is in accordance with our measured value.
˚^{ʂ ౰ࣾΧλϩάΛ͝࢖༻ͷࡍʹ͸ʮ౰ࣾ੡඼ʹؔ͢Δ͓அΓʯΛඞ͓ͣಡΈ͍ͩ͘͞ɻ}
˚^{ʂ Please read the "Notice for TAIYO YUDEN products" before using this catalog.}
373