NR3010T1R0N Datasheet, PDF (11/15 Pages) Taiyo Yuden (U.S.A.), Inc – SMD INDUCTORS LOW PROFILE TYPE

RELIABILITY DATAɹ
1/4
Specifled Value
Item
BRC1608, BRL2012, BRC2016,
BRL2518, BRL3225
Type
NRH24, NR30/40/60/80,
NRG40 Type
1.Operating Temperature
Range
2. S t o r a g e Te m p e r a t u re
Range
ʵ25ˆʙʴ105ˆ
ʵ40ˆʙʴ85ˆ
ʵ25ˆʙʴ120ˆ
3.Rated current
Within the specified tolerance
4.Inductance
Within the specified tolerance
5.DC Resistance
Within the specified tolerance
6.Self resonance frequency Within the specification
7.Temperature characteristic
BRL2012, BRC2016,
BRL2518, BRL3225
Inductance changeɿ
Withinʶ15ˋ
BRC1608
Inductance changeɿ
Withinʶ20ˋ
Inductance changeɿ
Withinʶ20ˋ
8.Resistance to flexure of
substrate
No damage.
9.Insulation resistanceɿ
between wires
10.Insulation resistanceɿ
ɹ between wire and core
11.Withstanding voltageɿ
between wires and core
˚^{ʂ ౰ࣾΧλϩάΛ͝࢖༻ͷࡍʹ͸ʮ౰ࣾ੡඼ʹؔ͢Δ͓அΓʯΛඞ͓ͣಡΈ͍ͩ͘͞ɻ}
NR10050 Type
ʵ25ˆʙʴ105ˆ
Test Method and Remarks
Including self-generated heat
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type,
NRH24, NR30/40/60/80, NRG4026Type ɿ0 to 40ˆ for the product with taping.
NR10050 Typeɿ0 ʙ40ˆ for the product with taping.
The maximum DC value having inductance decrease
within specified value and temperature increase within
40ˆ by the application of DC bias.
Inductance decrease
BRC1608,BRL2012,BRC2016,BRL2518, BRL3225Type,
ɹ NRH24, NR30/40/60/80,NRG40Type, NR10050Type
30ˋ
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type
LCR MeterɿHP 4285A or equivalent, Measuring frequency:Specified frequency
NRH24, NR30/40/60/80, NRG4026Type É¿
LCR MeterɿHP 4285A or equivalent, 100KHz, 1V
NR10050TypeɿLCR MeterɿHP 4263A or equivalent, 100KHz, 1V
DC ohmmeterɿHIOKI 3227 or equivalent
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type,
NRH24, NR30/40/60/80Type, NR10050Typeɿ
Inpedance analyzer/material analyzerɿHP4291A or equivalent
HP4191A, 4192A or equivalent
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type,
NRH24, NR30/40/60/80, NRG4026Type , NR10050Typeɿ
Measurement of inductance shall be taken at temperature
range within ʵ25ˆʙʴ85ˆ.
With reference to inductance value at ʴ20ˆ., change rate
shall be calculated.
Change of maximum inductance deviation in step 1 to 5
Temperature at step 1 20ˆ
Temperature at step 2 Minimum operating
temperature
Temperature at step 3 20ˆʢStandard temperatureʣ
Temperature at step 4 Maximum oparating
temperature
Temperature st step 5 20ˆ
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type,
NRH24, NR30/40/60/80, NRG4026Type É¿
The test samples shall be soldered to the test board by the reflow .
As illustrated below, apply force in the direction of the arrow
indicating until deflection of the test board reaches to 2 mm.
Test board sizeɿ100ʷ40ʷ1.0 Test board materialɿglass epoxy-resin
Solder cream thicknessɿ0.15(BR Series)
0.10(NR Series)
Land dimensionʢBRC1608ʣ
Land dimensionʢ̧̗̘2016ʣ
1.0
0.55 0.8 0.55
1.8
0.7 0.8 0.7
Land dimensionʢBRL2012ʣ
1.4
0.65 0.9 0.65
Land dimensionʢBRL2518ʣ
1.95
0.65 1.5 0.65
Land dimensionʢBRL3225ʣ
2.7
1.0 1.6 1.0
Land dimensionʢNR30ʣ
2.7
0.8 1.4 0.8
Land dimensionʢNR60ʣ
5.7
1.15 3.7 1.15
Force Rod
20
10
R230
Board
R5
Test Sample
45ʶ2mm 45ʶ2mm
Land dimensionʢNRH24ʣ
2.4
0.8 0.8 0.8
Land dimensionʢNR40ʣ
3.7
1.2 1.6 1.2
Land dimensionʢNR80ʣ
7.5
1.8 3.8 1.8
Printed board thickness: 1.0mm
Unit:mm
˚^{ʂ Please read the "Notice for TAIYO YUDEN products" before using this catalog.}
5
367