PQ60150EKXXX Datasheet, PDF (3/15 Pages) SynQor Worldwide Headquarters – Thermal shutdown protects converter from abnormal environmental conditions

Technical Specification
MECHANICAL DRAWING - ENCASED
.986±0.020
(25.04±0.5)
0.600 (15.24)
0.450 (11.43)
0.300 (7.62)
0.150 (3.81)
Top View
2.386±0.020
(60.6±0.5)
87654
Input: 35-75V
Output: 15V
Current: 3.3A
Part No.: PQ60150EKx03
Side View
0.500 ± 0.025
(12.7 ± 0.63)
Overall Height
2.00
(50.8)
0.183±0.020
(4.65±0.5)
12 3
0.193±0.020 (4.9±0.5)
0.300 (7.62)
0.600 (15.24)
0.180±.010
(4.57±0.25)
NOTES
1) Pins 1-3, 5-7 are 0.040” (1.02mm) diameter, with 0.080” (2.03mm)
diameter standoff shoulders.
2) Pins 4 and 8 are 0.062” (1.57 mm) diameter with 0.100" (2.54 mm)
diameter standoff shoulders.
3) Other pin extension lengths available. Recommended pin length is
0.03” (0.76mm) greater than the PCB thickness.
4) All Pins: Material - Copper Alloy- Finish (RoHS 6/6) - Matte Tin over
Nickel plate
5) Undimensioned components are shown for visual reference only.
6) All dimensions in inches (mm) Tolerances: x.xx +/-0.02 in. (x.x
+/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm)
7) Weight: 5 oz (142 g) typical
8) Workmanship: Meets or exceeds IPC-A-610C Class II
9) The flanged pins are designed to permit surface mount soldering
(allowing to avoid the wave soldering process) through the use of the
flanged pin-in-paste technique.
PIN DESIGNATIONS
Pin Name Function
1 Vin(+) Positive input voltage
TTL input to turn converter on
2 ON/OFF and off, referenced to Vin(–), with
internal pull up.
3 Vin(–) Negative input voltage
4 Vout(–) Negative output voltage
5 SENSE(–) Negative remote sense¹
6 TRIM Output voltage trim²
7 SENSE(+) Positive remote sense³
8 Vout(+) Positive output voltage
Notes:
1) SENSE(–) should be connected to Vout(–) either
remotely or at the converter.
2) Leave TRIM pin open for nominal output voltage.
3) SENSE(+) should be connected to Vout(+) either
remotely or at the converter.
Product # PQ60150EKx03
Phone [phone]
www.synqor.com
Doc.# 005-0005265 Rev. A
08/20/09
Page 3