PQ60025QPA60 Datasheet, PDF (2/14 Pages) SynQor Worldwide Headquarters – Quarter-brick DC/DC Converter

Technical Specification
MECHANICAL
DIAGRAM
0.14
(3.6)
1.45
(36.8)
0.425
(10.8)
0.600
(15.24)
0.300
(7.62)
2.30
(58.4)
2.00
(50.8)
Top View
Input: 35-75 V
Output: 2.5 V
Current: 60 A
Package: Quarter-brick
0.450
(11.43)
0.150
(3.81)
0.300
(7.62)
0.600
(15.24)
0.750
(19.05)
0.900
(22.86)
Bottom side
Clearance
See Note 9
0.056 +.032
(1.42 +.81)
Lowest
Component
Load Board
0.45
(11.4)
Flanged Pin
See Note 10
0.145
(3.68)
See Note 3
Side View
NOTES
1) Pins 1-3, 6-8 are 0.040” (1.02mm) diameter with 0.080”
(2.03 mm) diameter standoff shoulders.
2) Pins 4-5, 9-10 are 0.062” (1.57 mm) diameter with 0.100”
(2.54 mm) diameter standoff shoulders.
3) Other pin extension lengths available. Recommended pin
length is 0.03” (0.76mm) greater than the PCB thickness.
4) All Pins: Material - Copper Alloy
Finish - Tin/Lead over Nickel plate
5) Undimensioned components are shown for visual reference
only.
6) All dimensions in inches (mm)
Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm)
x.xxx +/-0.010 in. (x.xx +/-0.25mm)
7) Weight: 1.5 oz. (42 g) typical
8) Workmanship: Meets or exceeds IPC-A-610C Class II
9) UL/TUV standards require a clearance greater than 0.04”
(1.02mm) between input and output for Basic insulation. This issue
should be considered if any copper traces are on the top side of
the user’s board. Note that the ferrite cores are considered part of
the input/primary circuit.
10) The flanged pins are designed to permit surface mount
soldeing (avoiding the wave soldering process) through
the use of the flanged pin-in-paste technique.
Pin No.
1
2
3
4
5
6
7
8
9
10
PIN DESIGNATIONS
Name
Function
Vin(+)
Positive input voltage
ON/OFF
TTL input to turn converter
on and off, referenced to
Vin(-), with internal pull up.
Vin(-)
Negative input voltage
Vout(+)
Positive output voltage
Vout(-)
Negative output voltage
SENSE(-) Negative remote sense¹
TRIM
Output voltage trim²
SENSE(+) Positive remote sense³
Vout(+)
Positive output voltage
Vout(-)
Negative output voltage
Pins in Italics Shaded text are Optional
Notes:
1. SENSE(-) may be connected to Vout(-) or left open.
2. Leave TRIM pin open for nominal output voltage.
3. SENSE(+) may be connected to Vout(+) or left open.
Product # PQ60025QPA60
Phone [phone]
www.synqor.com
Doc.# 005-2QP625F Rev. A 12/10/04
Page 2