BQ4H136EEC45 Datasheet, PDF (2/13 Pages) SynQor Worldwide Headquarters – Industry standard eighth-brick pin-out configuration

Encased Mechanical Diagram
1.000 [25,40]
0.525
[13,34]
SEATING PLANE HEIGHT
0.500 0.025
[12,70 0,63]
2.700
[68,58]
2.200
[55,88]
0.004 [0,10]
0.24 [6,1]
0.05
[1,3]
Input: 230-400 V
Output: 13.6 V
Current: 45 A
Package: EXTENDED Eighth-brick
PIN EXTENSION
0.180
[4,57]
SEE NOTE 6
4
5
2.000
[50,80]
3
2
1
0.300
[7,62]
0.600
[15,24]
NOTES
1) APPLIED TORQUE PER M3 SCREW IS NOT TO EXCEED 6 in-lb.
SCREW SHOULD NOT EXCEED 0.100" (2.54 mm) DEPTH BELOW
THE SURFACE OF THE BASEPLATE.
2) BASEPLATE FLATNESS TOLERANCE IS 0.004" (.10 mm) TIR
FOR SURFACE.
3) PINS 1-3 ARE 0.040" (1.02 mm) DIA. WITH 0.080" (2.03 mm)
DIA. STANDOFFS.
4) PINS 4 AND 5 ARE 0.062" (1.57 mm) DIA. WITH 0.100" (2.54 mm)
DIA STANDOFFS.
5) ALL PINS: MATERIAL: COPPER ALLOY
FINISH: MATTE TIN OVER NICKEL PLATE
6) ALTERNATIVE PIN LENGTH MAY BE AVAILABLE.
CHECK WITH FACTORY.
7) _{WEIGHT: 2.24 oz (63.4 g)}
8) ALL DIMENSIONS IN INCHES(mm)
9) TOLERANCES: x.xx in +/-0.02 (x.x mm +/-0.5 mm)
x.xxx in +/-0.010 (x.xx mm +/-0.25 mm)
PIN DESIGNATIONS
Pin Name Function
1 +VIN Positive input voltage
2 ON/OFF Logic control input to turn converter on/off.
3 –VIN Negative input voltage
4 –VOUT Negative output voltage
5 +VOUT Positive output voltage
Product # BQ4H136EEC45
Phone [phone]
www.synqor.com
Doc.#005-0006641 Rev. C
05/11/16
Page 2