MPFC-115-270-QP Datasheet, PDF (1/16 Pages) SynQor Worldwide Headquarters – Internal inrush current limit

MPFC-115-270-QP
Power Factor Correction
Quarter-brick
Military Power Factor Correction Module
85-180Vrms
Input Voltage
47 - 63Hz / 360 - 800Hz 270Vdc
Input Frequency
Output Voltage
350W
Output Power
≥0.99
Power Factor
Up to 95%
Full Load Efficiency
The MPFCQor Power Factor Correction module is an
essential building block of an AC-DC power supply.
Used in conjunction with a hold-up capacitor,
SynQor’s high efficiency DC-DC converters and
SynQor’s AC line filter, the MPFCQor will draw a
nearly perfect sinusoidal current (PF>0.99) from
a single phase AC input. The module is supplied
completely encased to provide protection from
the harsh environments seen in many military and
aerospace environments.
M_M^P_4IL^F_87I^C_5T-A-^-₆₁¹_R38¹_YH0⁵_PzV^-_Or/²_mW⁷_3sE⁰_62R^-₀₇^QF-0^PA8V^-C0N_dT0c^{-OHMR3z5C0OWRRECTION}
Operational Features
Control Features
• Input voltage range: 85-180Vrms
• Universal input frequency range: 47 - 63Hz / 360 - 800Hz
• 350W output power
• ≥0.99 Power Factor
• High efficiency: >95% (115Vrms)
• Internal inrush current limit
• Auxiliary 10V bias supply
• Compatible with SynQor’s MCOTS DC-DC converters
and SynQor’s MCOTS AC line filters
Mechanical Features
• Industry standard quarter-brick pin-out
• Size: 1.54” x 2.39” x 0.50” (39.0 x 60.6 x 12.7 mm)
• Total weight: 3.07 oz. (87 g)
• Flanged baseplate version available
Safety Features
• Input/Output to baseplate isolation 2150Vdc
• UL 60950-1/R:2011-12
• CAN/CSA-C22.2 No. 60950-1/A1:2011
• EN60950-1/A2:2013
• CE Marked
• PFC Enable
• Load Enable (also: Power Out Good signal)
Protection Features
• Input current limit and auto-recovery short circuit protection
• Auto-recovery input under/over-voltage protection
• Auto-recovery output over-voltage protection
• Auto-recovery thermal shutdown
Compliance Features
Designed to meet these standards when used with
SynQor MACF Filters & MCOTS DC-DC Converters.
• MIL-STD-461(A-F)
• MIL-STD-1399
• MIL-STD-704-2, -704-4, & -704-6* (see 704 app section)
Contents
Page No.
Typical Application............................................................................2
Technical Specification......................................................................3
Technical Diagrams...........................................................................5
Screening & Qualification Testing.......................................................7
Application Section...........................................................................8
Encased Mechanical........................................................................14
Encased Mechanical with Flange......................................................15
Ordering Information......................................................................16
Product MPFC-115-270-QP
Phone [phone]
www.synqor.com
Doc.# 005-0006727 Rev. B 03/31/2016
Page 1