SM89T16R1 Datasheet, PDF (1/34 Pages) SyncMOS Technologies,Inc – 8-Bits Micro-controller With 64KB Flash ROM & IKB RAM & Two UART & RTC & ADC & PWM embedded

SyncMOS Technologies Inc.
SM89T16R1
8-Bits Micro-controller
With 64KB Flash ROM & IKB RAM & Two UART & RTC & ADC & PWM embedded
Product List
Feature
SM89T16R1L16, 16MHz 64KB internal flash MCU
SM89T16R1C25, 25MHz 64KB internal flash MCU
z Working Voltage: 3.3V or 5.0V.
z 80C51 Central Processor Unit (CPU),
General Description
The SM89T16R1 is a high speed (4 clocks /
machine cycle) single-chip 8-bits microcontroller
manufactured in an advanced CMOS process with
on chip flash memory. It supports a derivative of
the 80C51 microcontroller family. The
SM89T16R1 has the same instructions set as the
80C51.
The SM89T16R1 contains a 64KB on chip program
flash, a volatile 1280 x 8 bits data RAM, four 8-bits
I/O ports, one 4-bits I/O port, two 16-bits
timer/event counters, and an additional 16-bits
timer coupled to capture and compare latches, a
two-priority-level, nested interrupt structure, two
pulse-width- modulation outputs, two UART and
two DPTR, an on-chip oscillator and timing circuit.
For system that requires extra capability the
SM89T16R1 can be expanded using standard TTL
compatible memory and logic.
In addition, The SM89T16R1 has two software
selectable modes of power saving – IDLE mode
and POWER-DOWN mode. The IDLE mode
freezes the CPU while allowing the RAM, timer,
serial ports, and interrupt system to continue
functioning. The POWER-DOWN mode saves the
RAM contents but freezes the oscillator, causing all
other chip functions to be inoperative.
The Power Management Mode (PMM) is useful for
portable or battery-powered applications. This
High-Speed Architecture (4 clocks / machine
cycle), the maximum clock rate is 25 MHz.
z 64K x 8 on chip flash memory can be
programmed at V_{PP =} 12V
z 1280 x 8 RAM (On-Chip 256 bytes and
Expand 1024 bytes), expandable externally to
64KB
z Two standard 16-bits timers/counters
z An additional 16-bits timer/counter coupled to
a capture and compare register.
z Two 8-bits / 5-bits resolution
Pulse-Width-Modulation (PWM) outputs.
z Four channels 6 bits Analog to Digital
Converter (ADC).
z Four 8-bits I/O ports.(For PDIP package)
z Four 8-bits I/O ports plus one 4-bits I/O port.
(For PLCC or PQFP package)
z Two Full-duplex Enhance UART
z Two DPTR (either data pointer can be
incremented and decrement).
z 13 interrupt sources (default 6 + int2, int3, int4,
int5, UART1, ADC, RTC) with 2 priority
levels.
z RTC (Real Time Clock) function.
z Extended temperature range (-40℃ to +85℃)
z Software enable/disable ALE output pulse
z Wake-up from POWER-DOWN mode by
external interrupt, RTCI or H/W Reset.
feature allows software to select a lower speed
clock as the main time base.
Ordering Information
SM89T16R1ihhk
yymmv
i: process identifier {L=3.0V~3.6V,C=4.5V~ 5.5V}
hh: working clock in MHz {16,25}
k: package type postfix {as below table}
yy: year mm: month
v: version identifier { , A, B, ...}
Taiwan
4F, No. 1 Creation Road 1,
Science-based Industrial Park,
Hsinchu, Taiwan 30077
TEL: [phone] #2667
886-3-579-2987
FAX: [phone]
886-3-5780493
Specifications subject to change without notice contact your sales representatives for the most recent information.
SM89T16R1 V1.0 JANUARY 2005
1