L1M-1N0S-10 Datasheet, PDF (8/10 Pages) Superworld Electronics – High Frequency Chip Inductor

High Frequency Chip Inductor
L1M SERIES
8-3. Solder Volume
Accordingly increasing the solder volume, the mechanical stress to product is also increased. Exceeding solder volume
may cause the failure of mechanical or electrical performance. Solder shall be used not to be exceed as shown in Fig. 4.
Minimum fillet height = soldering thickness + 25% product height
Upper limit
R ec ommendable
Figure 4
NOTE : Specifications subject to change without notice. Please check our website for latest information.
10.11.2011
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 8