STM8L152C8T6 Datasheet, PDF (98/134 Pages) STMicroelectronics – 8-bit ultralow power MCU, up to 64 KB Flash + 2 KB data EEPROM, RTC, LCD, timers, USARTs, I2C, SPIs, ADC, DAC, comparators

Electrical parameters
STM8L15xx8, STM8L15xR6
Figure 28. Typical pull-up current I_pu vs. V_DD with V_IN=V_SS

 #

 #
 #

 #




             
6_$$;6=
AI
Output driving current
Subject to general operating conditions for V_DD and T_A unless otherwise specified.
I/O
Type
Symbol
Table 39. Output driving current (high sink ports)
Parameter
Conditions Min. Max. Unit
I_IO = +2 mA,
V_DD = 3.0 V
0.45
V_OL ⁽¹⁾ Output low level voltage for an I/O pin
I_IO = +2 mA,
V_DD = 1.8 V
0.45
I_IO = +10 mA,
V_DD = 3.0 V
0.7
V
I_IO = -2 mA,
V_DD = 3.0 V
V_DD-0.45
V_OH ⁽²⁾ Output high level voltage for an I/O pin
I_IO = -1 mA,
V_DD = 1.8 V
V_DD-0.45
I_IO = -10 mA,
V_DD = 3.0 V
V_DD-0.7
1.
TofhIe_IOI_{IO(I/Ocuprroerntst}
sunk must always respect the absolute maximum
and control pins) must not exceed I_VSS.
rating
specified
in
Table
16
and
the
sum
2.
The
sum
Io_IOf
current sourced must always respect the absolute maximum
I_IO (I/O ports and control pins) must not exceed I_VDD.
rating
specified
in
Table
16
and
the
98/134
DocID17943 Rev 6