STM8L152C8T6 Datasheet, PDF (114/134 Pages) STMicroelectronics – 8-bit ultralow power MCU, up to 64 KB Flash + 2 KB data EEPROM, RTC, LCD, timers, USARTs, I2C, SPIs, ADC, DAC, comparators

Electrical parameters
STM8L15xx8, STM8L15xR6
Table 53. ADC1 characteristics (continued)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
t_S
Sampling time
V_AIN PF0/1/2/3 fast
channels
V_DDA < 2.4 V
V_AIN PF0/1/2/3 fast
channels
2.4 V ≤V_DDA≤ 3.6 V
V_AIN on slow channels
V_DDA < 2.4 V
V_AIN on slow channels
2.4 V ≤V_DDA≤ 3.6 V
0.43⁽³⁾⁽⁴⁾
0.22⁽³⁾⁽⁴⁾
0.86⁽³⁾⁽⁴⁾
0.41⁽³⁾⁽⁴⁾
t_conv 12-bit conversion time
t_WKUP
t_IDLE(5)
t_VREFINT
Wakeup time from OFF
state
Time before a new
conversion
Internal reference
voltage startup time
16 MHz
12 + t_S
1⁽³⁾
3
∞
refer to
Table 46
µs
1/f_ADC
µs
µs
s
ms
1.
The current consumption through
- one constant (max 300 µA)
V_REF
is
composed
of
two
parameters:
- one variable (max 400 µA), only during sampling time + 2 first conversion pulses.
So, peak consumption is 300+400 = 700 µA and average consumption is 300 + [(4 sampling + 2) /16] x 400 = 450 µA at
1Msps
2. V_REF- must be tied to ground.
3. Minimum sampling and conversion time is reached for maximum R_AIN= 0.5 kΩ..
4. Value obtained for continuous conversion on fast channel.
5. The time between 2 conversions, or between ADC ON and the first conversion must be lower than t_IDLE.
114/134
DocID17943 Rev 6