TS4855_04 Datasheet, PDF (7/27 Pages) STMicroelectronics – LOUDSPEAKER & HEADSET DRIVER WITH VOLUME CONTROL

Electrical Characteristics
TS4855
Table 4: Electrical characteristics at VCC = +5.0 V, GND = 0 V, Tamb = 25°C
(unless otherwise specified)
Symbol
Parameter
Min. Typ. Max. Unit
Phone In Volume
BTL maximum GAIN from Phone In HS to R_out, L_out
BTL minimum GAIN from Phone In HS to R_out, L_out
Phone In Volume
BTL maximum gain from Rin, Lin to R_out, L_out
BTL minimum gain from Rin, Lin to R_out, L_out
Phone In Volume
BTL gain from Phone In IHF to SPKR_out
Zin
Phone In IHF Input Impedance
Zin
Phone In HS, Rin & Lin Input Impedance, All Gain setting
tes
Enable Step up Time - ENB
teh
Enable Hold Time - ENB
tel
Enable Low Time - ENB
tds
Data Setup Time- DATA
tdh
Data Hold Time - DATA
tcs
Clock Setup time - CLK
tch
Clock Logic High Time - CLK
tcl
Clock Logic Low Time - CLK
fclk
Clock Frequency - CLK
dB
5.4 6 6.6
-41.1 -40.5 -39.9
dB
11.4 12 12.6
-35.1 -34.5 -33.9
11.4 12 12.6 dB
16 20 24 kΩ
42.5 50 57.5 kΩ
20
ns
20
ns
30
ns
20
ns
20
ns
20
ns
50
ns
50
ns
DC
10 MHz
Table 5: Electrical characteristics at VCC = +3.0 V, GND = 0 V, Tamb = 25°C
(unless otherwise specified)
Symbol
Parameter
I_CC
I_STANDBY
Voo
Vil
Vih
Supply Current, all gain @ max settings
Output Mode 1, Vin = 0 V, no load
Output Mode 1, Vin = 0 V, loaded (8Ω)
Output Mode 2,3,4,5,6,7 Vin = 0 V, no loads
Output mode 2,3,4,5,6,7 Vin = 0 V, loaded (8Ω, 32Ω)
Standby Current
Output Mode 0
Output Offset Voltage (differential)
Output Mode 1 to 7, Vin = 0 V, no load, Speaker Out
Output Mode 2 to 7 Vin = 0 V, no loads, Headset Out
“Logic low” input Voltage
“Logic high” input Voltage
Min. Typ. Max. Unit
mA
3.5 7
4.5 8
7.5 10
9
11
µA
0.6 2
mV
5
20
5
40
0
0.4 V
1.4
3
V
7/27