M69KB096AB Datasheet, PDF (62/73 Pages) STMicroelectronics – 64 Mbit (4Mb x 16), 104MHz Clock Rate, 1.8V Supply, Bare Die, Burst PSRAM

9 DC and AC parameters
M69KB096AB
Figure 31. Synchronous Burst Write Followed by Read AC Waveforms (4 Words)
1. The Latency type can set to fixed or variable mode. The Latency is set to 3 clock cycles (BCR13-BCR11 = 101). The WAIT
signal is active Low (BCR10=0), and is asserted during delay (BCR8=0).
2. E can remain Low between the Burst Read and Burst Write operation, but it must not be held Low for longer than t_ELEH.
62/73