ESDAVLC8-1BU2 Datasheet, PDF (6/11 Pages) STMicroelectronics – Single-line low capacitance Transil

Package information
3
Package information
ESDAVLC8-1BU2
● Epoxy meets UL94, V0
● Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK^® packages, depending on their level of environmental compliance. ECOPACK^®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK^® is an ST trademark.
Table 3. ST0201 dimensions
D
E
Top
A
Side
b1
b2
L1
L2
Bottom
Pin 2 _b1 ^e _b2
L1
L2
Bottom
e
Pin 2 available in different forms
Dimensions
Ref. Millimeters
Inches
Min. Typ. Max. Min. Typ. Max.
A 0.23 0.28 0.33 0.009 0.011 0.013
b1 0.13 0.18 0.23 0.005 0.007 0.009
b2 0.14 0.19 0.24 0.006 0.007 0.009
D 0.55 0.60 0.65 0.022 0.024 0.026
E 0.25 0.30 0.35 0.010 0.012 0.014
e - 0.35 -
- 0.014 -
L1 0.20 0.25 0.30 0.008 0.010 0.012
L2 0.20 0.25 0.30 0.008 0.010 0.012
Figure 12. Footprint (dimensions in mm) Figure 13. Marking
1.05
0.425
0.425
Pin1
V2
Pin 2
0.30
Note:
0.20
Product marking may be rotated by multiples of 180° for assembly plant differentiation. In no
case should this product marking be used to orient the component for its placement on a
PCB. Only pin 1 mark is to be used for this purpose.
6/11
Doc ID 16546 Rev 2