STB45N50DM2AG Datasheet, PDF (5/15 Pages) STMicroelectronics – Fast-recovery body diode

STB45N50DM2AG
Symbol Parameter
ISD
Source-drain
current
ISDM⁽¹⁾
Source-drain
current
(pulsed)
VSD⁽²⁾
Forward on
voltage
trr
Reverse
recovery time
Reverse
Qrr
recovery
charge
Reverse
IRRM recovery
current
trr
Reverse
recovery time
Reverse
Qrr
recovery
charge
Reverse
IRRM recovery
current
Table 8: Source-drain diode
Test conditions
Electrical characteristics
Min. Typ. Max. Unit
-
35 A
-
140 A
VGS = 0 V, ISD = 35 A
ISD = 35 A, di/dt = 100 A/µs, VDD = 100 V
(see Figure 16: "Test circuit for inductive
load switching and diode recovery times")
-
1.6 V
- 105
ns
- 0.48
µC
- 9.2
A
- 230
ns
ISD = 35 A, di/dt = 100 A/µs, VDD = 60 V,
Tj = 150 °C (see Figure 16: "Test circuit for - 2.3
µC
inductive load switching and diode
recovery times")
- 20
A
Notes:
(1) _{Pulse width is limited by safe operating area.}
(2) _{Pulse test: pulse duration = 300 µs, duty cycle 1.5%.}
Symbol
V(BR)GSO
Table 9: Gate-source Zener diode
Parameter
Test conditions
Gate-source breakdown voltage IGS = ±250 µA, ID = 0 A
Min. Typ. Max. Unit
±30 -
-
V
The built-in back-to-back Zener diodes are specifically designed to enhance the ESD
performance of the device. The Zener voltage facilitates efficient and cost-effective device
integrity protection, thus eliminating the need for additional external componentry.
DocID028417 Rev 1
5/15