ESDAXLC6-1MY2 Datasheet, PDF (5/11 Pages) STMicroelectronics – Extra low capacitance single line TVS

ESDAXLC6-1MY2
3
Package information
Package information
● Epoxy meets UL 94, V0
● Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK^® packages, depending on their level of environmental compliance. ECOPACK^®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK^® is an ST trademark.
Table 3. µQFN-2L dimensions
D
INDEX AREA
(D/2 x E/2)
E
A
A1
b1
INDEX AREA
(D/2 x E/2)
L1
b2
L2
OPTIONAL
PIN # 1 ID
e
Dimensions
Ref.
Millimeters
Inches
Min. Typ. Max. Min. Typ. Max.
A 0.45 0.50 0.55 0.017 0.020 0.022
A1 0.00
0.05 0.000
0.002
b1 0.20 0.25 0.30 0.008 0.010 0.012
b2 0.20 0.25 0.30 0.008 0.010 0.012
D
1.00
0.039
E
0.60
0.024
e
0.65
0.026
L1 0.45 0.50 0.55 0.018 0.020 0.022
L2 0.45 0.50 0.55 0.018 0.020 0.022
Figure 10. Footprint (dimensions in mm) Figure 11. Marking
0.55
0.55
0.50
Pin1
7 Pin 2
0.40
Note:
Product marking may be rotated by 90° for assembly plant differentiation. In no case should
this product marking be used to orient the component for its placement on a PCB. Only pin
1 mark is to be used for this purpose.
Doc ID 16923 Rev 2
5/11