STM32F100VCT6 Datasheet, PDF (47/98 Pages) STMicroelectronics – High-density value line, advanced ARM-based 32-bit MCU with 256 to 512 KB Flash, 16 timers, ADC, DAC & 11 comm interfaces

STM32F100xC, STM32F100xD, STM32F100xE
Electrical characteristics
5.3.6
Table 19. Peripheral current consumption (continued)
Peripheral
Typical consumption at 25 °C⁽¹⁾
Unit
APB2
GPIO A
GPIO B
GPIO C
GPIO D
GPIO E
GPIO F
GPIO G
ADC1⁽³⁾
SPI1
USART1
TIM1
TIM15
TIM16
TIM17
0.26
0.26
0.26
0.26
0.26
0.24
0.25
mA
1.28
0.2
0.37
0.63
0.43
0.34
0.34
1. f_HCLK = f_APB1 = f_APB2 = 24 MHz, default prescaler value for each peripheral.
2. Specific conditions for DAC: EN1 bit in DAC_CR register set to 1.
3. Specific conditions for ADC: f_HCLK = 24 MHz, f_APB1 = f_APB2 = f_HCLK, f_ADCCLK = f_APB2/2, ADON bit in the
ADC_CR2 register is set to 1.
External clock source characteristics
High-speed external user clock generated from an external source
The characteristics given in Table 20 result from tests performed using an high-speed
external clock source, and under the ambient temperature and supply voltage conditions
summarized in Table 9.
Table 20. High-speed external user clock characteristics
Symbol
Parameter
Conditions
Min Typ Max Unit
f_{HSE_ext}
User external clock source
frequency⁽¹⁾
V_HSEH
OSC_IN input pin high level
voltage⁽¹⁾
V_HSEL
OSC_IN input pin low level
voltage⁽¹⁾
t_w(HSE)
t_w(HSE)
t_r(HSE)
t_f(HSE)
C_in(HSE)
OSC_IN high or low time⁽¹⁾
OSC_IN rise or fall time⁽¹⁾
OSC_IN input capacitance⁽¹⁾
1
8
24 MHz
0.7V_DD
V_SS
V_DD
V
0.3V_DD
5
ns
20
5
pF
Doc ID 15081 Rev 7
47/98