I3G4250D Datasheet, PDF (38/43 Pages) STMicroelectronics – 3-axis digital output gyroscope

Register description
I3G4250D
Table 51. INT1_SRC description
Interrupt active. Default value: 0
IA
(0: no interrupt has been generated; 1: one or more interrupts have been generated)
ZH
Z high. Default value: 0 (0: no interrupt, 1: Z high event has occurred)
ZL
Z low. Default value: 0 (0: no interrupt; 1: Z low event has occurred)
YH
Y high. Default value: 0 (0: no interrupt, 1: Y high event has occurred)
YL
Y low. Default value: 0 (0: no interrupt, 1: Y low event has occurred)
XH
X high. Default value: 0 (0: no interrupt, 1: X high event has occurred)
XL
X low. Default value: 0 (0: no interrupt, 1: X low event has occurred)
Interrupt source register. Read-only register.
Reading at this address clears the INT1_SRC IA bit (and eventually the interrupt signal on
the INT1 pin) and allows the refresh of data in the INT1_SRC register if the latched option is
chosen.
7.17
INT1_THS_XH (32h)
Table 52. INT1_THS_XH register
-
THSX14 THSX13 THSX12 THSX11 THSX10 THSX9 THSX8
Table 53. INT1_THS_XH description
THSX14 - THSX8 Interrupt threshold. Default value: 0000 0000
7.18
INT1_THS_XL (33h)
THSX7
THSX6
Table 54. INT1_THS_XL register
THSX5 THSX4 THSX3 THSX2
THSX1
THSX0
Table 55. INT1_THS_XL description
THSX7 - THSX0 Interrupt threshold. Default value: 0000 0000
7.19
INT1_THS_YH (34h)
Table 56. INT1_THS_YH register
-
THSY14 THSY13 THSY12 THSY11 THSY10 THSY9 THSY8
Table 57. INT1_THS_YH description
THSY14 - THSY8 Interrupt threshold. Default value: 0000 0000
38/43
DocID027628 Rev 2