STCC5011 Datasheet, PDF (36/37 Pages) STMicroelectronics – Constant current mode overcurrent protection

Revision history
9
Revision history
STCC5011, STCC5021
Date
20-May-2013
24-Jun-2013
06-Dec-2013
06-Feb-2014
25-Feb-2014
26-Aug-2014
Table 9. Document revision history
Revision
Changes
1
Initial release.
Updated Features on page 1 (added UL and CB
recognized components).
Updated note 3. below Table 2 (updated data, added
cross-reference to Figure 4).
Updated Table 4 (updated parameters and conditions to
2
│I_REVERSE│, I_OL(FAULT), I_{OL(CHARGING/ATTACH)}, I_CTLx,
I_{OL(CHARGING/ATTACH)} symbols, added I_{ATTACH_EN}
symbol).
Added Figure 4 on page 12.
Added Note: in Section 5.1 on page 13.
Added Section 5.9 on page 22.
Updated Table 4 (updated min. conditions for I_OS - R_ILIM
96 kΩ and R_ILIM 33 kΩ).
Updated Table 5 (updated Host state column, added
3
footnote 1. and 2.below table).
Updated Section 5.7 (replaced equation by Equation 1 to
Equation 3).
Minor modifications throughout document.
Replaced adjustable current limit with 2.8 A throughout
4
document
Table 4: added current limiter threshold condition “R_ILIM =
17.2 kΩ"
Section 5.7: Power switch: updated Equation 2 and
5
Equation 3 and added explanation of same.
Table 8: Order codes: added “Marking”
Description: added information about S4/S5 deep sleep
off states and G3 shutdown state.
Section 5.5: Attach detection: added information about
6
S4/S5 deep sleep off states and G3 shutdown state;
replaced Figure 6.
Section 5.6: Charging detection and safety timer: updated
text with respect to S4/S5 states and switching on the low-
power LDO; replaced Figure 9.
36/37
DocID024660 Rev 6