M24M01-R_09 Datasheet, PDF (36/37 Pages) STMicroelectronics – 1 Mbit serial I²C bus EEPROM

Revision history
M24M01-R, M24M01-W, M24M01-HR
Table 22. Document revision history (continued)
Date
Revision
Changes
02-Sep-2008
12-Mar-2009
26-Jun-2009
Added: M24M01-W part number in device grade 3 temperature range
(see Table 8: Operating conditions (M24M01-W), Table 12: DC
characteristics (M24M01-W) and Table 19: Ordering information
scheme (M24M01-x products sold in packages)).
M24M01-R offered as a bare die (see Section 8: M24M01-R die
description and Table 20: Ordering information scheme (M24M01-R
sold as bare dice)).
In Table 13: AC characteristics at 400 kHz (M24M01-R and M24M01-
5
W), Note 1 modified, Note 2 added, t_XH1XH2, t_XL1XL2 and t_DL1DL2
values modified.
In Table 14: AC characteristics at 1 MHz (M24M01-HR), Note 1
modified, Note 3 added, t_XH1XH2, t_XL1XL2 and t_DL1DL2 values modified.
t_CHDX, t_DL1DL2 and t_DXCX changed to t_CHDL, t_QL1QL2 and t_DXCH,
respectively (see Table 13, Table 14 and Figure 13).
Table 21: Available M24M01-x products (package, voltage range,
frequency, temperature grade) added.
Small text changes.
WLCSP8 package added (see Figure 3: WLCSP8 connections and
Section 7: Package mechanical data).
Section 2.6: Supply voltage (VCC) updated.
6
I_OL added to Table 6: Absolute maximum ratings.
V_RES added to Table 11: DC characteristics (M24M01-R and
M24M01-HR) and Table 12: DC characteristics (M24M01-W).
ECOPACK text updated.
Section : Features updated.
NC pin changed to DU in Figure 2: SO connections.
Device select code Chip enable address bits updated in Section 2.3.
Internal reset threshold modified in Section 2.6.3: Device reset.
Figure 6: M24M01-HR – Maximum Rbus value versus bus parasitic
capacitance (Cbus) for an I2C bus at maximum frequency fC = 1MHz
updated.
7
V_RES removed, and I_CC1 conditions modified in Table 11: DC
characteristics (M24M01-R and M24M01-HR), and Table 12: DC
characteristics (M24M01-W). V_RES removed from Table 12: DC
characteristics (M24M01-W).
t_XH1XH2 updated in Table 13: AC characteristics at 400 kHz (M24M01-
R and M24M01-W). t_XH1XH2 updated, and Note 5 updated in Table 14:
AC characteristics at 1 MHz (M24M01-HR).
Command replaced by instruction in the whole document.
36/37
Doc ID 12943 Rev 7