LSM303DLHCTR Datasheet, PDF(33/42 Page) STMicroelectronics – Ultra compact high performance e-compass 3D accelerometer and 3D magnetometer module

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

LSM303DLHCTR Datasheet, PDF (33/42 Pages) STMicroelectronics – Ultra compact high performance e-compass 3D accelerometer and 3D magnetometer module

◁

LSM303DLHC

Table 53. INT2_SRC_A description

Interrupt active. Default value: 0

(0: no interrupt has been generated, 1: one or more interrupts have been generated)

Z high. Default value: 0

(0: no interrupt, 1: Z high event has occurred)

Z low. Default value: 0

(0: no interrupt, 1: Z low event has occurred)

Y high. Default value: 0

(0: no interrupt, 1: Y high event has occurred)

Y low. Default value: 0

(0: no interrupt, 1: Y low event has occurred)

X high. Default value: 0

(0: no interrupt, 1: X high event has occurred)

X Low. Default value: 0

(0: no interrupt, 1: X low event has occurred)

7.1.20

Interrupt 2 source register. Read only register.

Reading at this address clears INT2_SRC IA bit (and the interrupt signal on the INT 2 pin)

and allows the refreshing of data in the INT2_SRC register if the latched option was chosen.

INT2_THS_A (36h)

Table 54. INT2_THS_A register

0(1)

THS6

THS5

THS4

THS3

1. This bit must be set to â0â for correct working of the device

THS2

THS1

THS0

Table 55. INT2_THS_A description

THS6 - THS0 Interrupt 1 threshold. Default value: 000 0000

7.1.21 INT2_DURATION_A (37h)

Table 56. INT2_DURATION_A register

0(1)

1. This bit must be set to â0â for correct working of the device

Table 57. INT2_DURATION_A description

D6-D0

Duration value. Default value: 000 0000

Doc ID 018771 Rev 1

33/42

▷