H3LIS331DL Datasheet, PDF (32/38 Pages) STMicroelectronics – MEMS motion sensor: low-power high-g 3-axis digital accelerometer

Register description
7.15 INT1_THS (32h)
Table 42. INT1_THS register
0
THS6
THS5
THS4
THS3
THS2
Table 43. INT1_THS description
THS6 - THS0 Interrupt 1 threshold. Default value: 000 0000
H3LIS331DL
THS1
THS0
7.16 INT1_DURATION (33h)
Table 44. INT1_DURATION register
0
D6
D5
D4
D3
D2
D1
D0
D6 - D0
Table 45. INT2_DURATION description
Duration value. Default value: 000 0000
The D6 - D0 bits set the minimum duration of the interrupt 2 event to be recognized.
Duration steps and maximum values depend on the ODR chosen.
7.17
INT2_CFG (34h)
Table 46. INT2_CFG register
AOI
0
ZHIE
ZLIE
YHIE
YLIE
XHIE
XLIE
AOI
ZHIE
ZLIE
YHIE
YLIE
Table 47. INT2_CFG description
AND/OR combination of interrupt events. Default value: 0.
(See Table 48)
Enable interrupt generation on Z high event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Z low event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on Y high event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Y low event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
32/38
DocID023111 Rev 2