H3LIS331DL Datasheet, PDF (13/38 Pages) STMicroelectronics – MEMS motion sensor: low-power high-g 3-axis digital accelerometer

H3LIS331DL
Mechanical and electrical specifications
2.4
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 7. Absolute maximum ratings
Symbol
Ratings
Maximum value Unit
Vdd Supply voltage
-0.3 to 4.8
V
Vdd_IO I/O pins supply voltage
-0.3 to 4.8
V
Input voltage on any control pin
Vin
(CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0)
-0.3 to Vdd_IO +0.3 V
A_POW Acceleration (any axis, powered, Vdd = 2.5 V)
3000 g for 0.5 ms
10000 g for 0.1 ms
A_UNP Acceleration (any axis, unpowered)
3000 g for 0.5 ms
10000 g for 0.1 ms
T_OP
T_STG
Operating temperature range
Storage temperature range
-40 to +85
°C
-40 to +125
°C
4 (HBM)
kV
ESD Electrostatic discharge protection
1.5 (CDM)
kV
200 (MM)
V
Note:
Supply voltage on any pin should never exceed 4.8 V.
This device is sensitive to mechanical shock, improper handling can cause
permanent damage to the part.
This is an electrostatic-sensitive device (ESD), improper handling can cause
permanent damage to the part.
DocID023111 Rev 2
13/38
38