LPS25HB Datasheet, PDF (25/40 Pages) STMicroelectronics – MEMS pressure sensor: 260-1260 hPa absolute digital output barometer

LPS25HB
Register mapping
Registers marked as Reserved must not be changed. Writing to those registers may cause
permanent damage to the device.
To guarantee the proper behavior of the device, all register addresses not listed in the
previous table must not be accessed and the content stored in those registers must not be
changed.
The content of the registers that are loaded at boot should not be changed. They contain the
factory calibration values. Their content is automatically restored when the device is
powered up.
DocID027112 Rev 2
25/40
40