STM32L151RDT6 Datasheet, PDF (12/140 Pages) STMicroelectronics – Ultra-low-power 32-bit MCU ARM-based Cortex-M3, 384KB Flash, 48KB SRAM, 12KB EEPROM, LCD, USB, ADC, DAC, memory I/F

Description
STM32L151xD STM32L152xD
2.2
Note:
2.2.1
2.2.2
2.2.3
2.2.4
Ultra-low-power device continuum
The ultra-low-power STM32L15xxD, STM32L162xD, STM32L15xxC and STM32L162xC are
fully pin-to-pin and software compatible. Besides the full compatibility within the family, the
devices are part of STMicroelectronics microcontrollers ultra-low-power strategy which also
includes STM8L101xx and STM8L15xx devices. The STM8L and STM32L families allow a
continuum of performance, peripherals, system architecture and features.
They are all based on STMicroelectronics ultralow leakage process.
The ultra-low-power STM32L and general-purpose STM32Fxxxx families are pin-to-pin
compatible. The STM8L15xxx devices are pin-to-pin compatible with the STM8L101xx
devices. Please refer to the STM32F and STM8L documentation for more information on
these devices.
Performance
All families incorporate highly energy-efficient cores with both Harvard architecture and
pipelined execution: advanced STM8 core for STM8L families and ARM Cortex™-M3 core
for STM32L family. In addition specific care for the design architecture has been taken to
optimize the mA/DMIPS and mA/MHz ratios.
This allows the ultra-low-power performance to range from 5 up to 33.3 DMIPs.
Shared peripherals
STM8L15xxx and STM32L15xxx share identical peripherals which ensure a very easy
migration from one family to another:
● Analog peripherals: ADC, DAC and comparators
● Digital peripherals: RTC and some communication interfaces
Common system strategy
To offer flexibility and optimize performance, the STM8L15xxx and STM32L15xxx families
use a common architecture:
● Same power supply range from 1.65 V to 3.6 V
● Architecture optimized to reach ultralow consumption both in low power modes and
Run mode
● Fast startup strategy from low power modes
● Flexible system clock
● Ultrasafe reset: same reset strategy including power-on reset, power-down reset,
brownout reset and programmable voltage detector
Features
ST ultra-low-power continuum also lies in feature compatibility:
● More than 10 packages with pin count from 20 to 144 pins and size down to 3 x 3 mm
● Memory density ranging from 4 to 384 Kbytes
12/140
Doc ID 022027 Rev 6