English
Language : 

STM32L062K8 Datasheet, PDF (113/118 Pages) STMicroelectronics – Ultra-low-power platform
STM32L062x8
9
Revision history
Revision history
Date
19-Feb-2014
29-Apr-2014
Table 80. Document revision history
Revision
Changes
1
Initial release.
HSE clock removed in the whole document.
Updated Table 2: Functionalities depending on the operating power
supply range. Added Section 3.2: Interconnect matrix.
Replaced TTa I/O structure by TC, updated PA0/4/5, PC14, BOOT0
and NRST I/O structure, and added note 2 in Table 15: STM32L062x8
pin definitions.
Updated Table 18: Voltage characteristics and Table 19: Current
characteristics.
Updated Table 25: Current consumption in Run mode, code with data
processing running from Flash and Table 26: Current consumption in
Run mode, code with data processing running from RAM, Table 27:
Current consumption in Sleep mode, Table 28: Current consumption in
Low-power run mode, Table 29: Current consumption in Low-power
sleep mode, Table 30: Typical and maximum current consumptions in
Stop mode and Table 31: Typical and maximum current consumptions
in Standby mode. Added Figure 11: IDD vs VDD, at TA=
25/55/85/105 °C, Run mode, code running from Flash memory, Range
2, HSE, 1WS, Figure 12: IDD vs VDD, at TA= 25/55/85/105 °C, Run
2
mode, code running from Flash memory, Range 2, HSI16, 1WS,
Figure 13: IDD vs VDD, at TA= 25/55/ 85/105/125 °C, Low-power run
mode, code running from RAM, Range 3, MSI (Range 0) at 64 KHz, 0
WS and Figure 14: IDD vs VDD, at TA= 25/55/ 85/105/125 °C, Stop
mode with RTC enabled and running on LSE Low drive.
Updated Table 37: LSE oscillator characteristics. Added Figure 18:
HSI16 minimum and maximum value versus temperature.
Updated Table 48: ESD absolute maximum ratings, Table 50: I/O
current injection susceptibility and Table 51: I/O static characteristics,
and added Figure 19: VIH/VIL versus VDD (CMOS I/Os) and Figure 20:
VIH/VIL versus VDD (TTL I/Os). Updated Table 52: Output voltage
characteristics, Table 53: I/O AC characteristics and Figure 21: I/O AC
characteristics definition.
Updated Table 55: ADC characteristics, Table 57: ADC accuracy, and
Figure 24: Typical connection diagram using the ADC. Updated
Table 60: Temperature sensor characteristics.
Updated Table 66: SPI characteristics and Table 69: I2S
characteristics.
Added Figure 42: Thermal resistance.
DocID025937 Rev 8
113/118
117