|
ST10F276E Datasheet, PDF (1/235 Pages) STMicroelectronics – 16-bit MCU with MAC unit 832 Kbyte Flash memory and 68 Kbyte RAM | |||
|
ST10F276E
16-bit MCU with MAC unit
832 Kbyte Flash memory and 68 Kbyte RAM
Datasheet â production data
Features
â Highly performance 16-bit CPU with DSP
functions
â 31.25ns instruction cycle time at 64MHz
max CPU clock
â Multiply/accumulate unit (MAC) 16 x 16-bit
multiplication, 40-bit accumulator
â Enhanced boolean bit manipulations
â Single-cycle context switching support
â On-chip memories
â 512 Kbyte Flash memory (32-bit fetch)
â 320 Kbyte extension Flash memory (16-bit
fetch)
â Single voltage Flash memories with
erase/program controller and 100K
erasing/programming cycles
â Up to 16 Mbyte linear address space for
code and data (5 Mbytes with CAN or I2C)
â 2 Kbyte internal RAM (IRAM)
â 66 Kbyte extension RAM (XRAM)
â External bus
â Programmable external bus configuration &
characteristics for different address ranges
â 5 programmable chip-select signals
â Hold-acknowledge bus arbitration support
â Interrupt
â 8-channel peripheral event controller for
single cycle interrupt driven data transfer
â 16-priority-level interrupt system with 56
sources, sampling rate down to 15.6ns
â Timers
â 2 multi-functional general purpose timer
units with 5 timers
â Two 16-channel capture / compare units
PQFP144 (28 x 28 x 3.4mm)
(Plastic quad flat package)
LQFP144 (20 x 20 x 1.4mm)
(Low profile plastic quad
flat package)
â 4-channel PWM unit + 4-channel XPWM
â A/D converter
â 24-channel 10-bit
â 3 µs minimum conversion time
â Serial channels
â 2 synch. / asynch. serial channels
â 2 high-speed synchronous channels
â 1 I2C standard interface
â 2 CAN 2.0B interfaces operating on 1 or 2 CAN
busses (64 or 2x32 message, C-CAN version)
â Fail-safe protection
â Programmable watchdog timer
â Oscillator watchdog
â On-chip bootstrap loader
â Clock generation
â On-chip PLL with 4 to 12 MHz oscillator
â Direct or prescaled clock input
â Real-time clock and 32 kHz on-chip oscillator
â Up to 111 general purpose I/O lines
â Individually programmable as input, output
or special function
â Programmable threshold (hysteresis)
â Idle, power down and stand-by modes
â Single voltage supply: 5V ±10% (embedded
regulator for 1.8 V core supply)
August 2012
This is information on a product in full production.
Doc ID 12303 Rev 3
1/235
www.st.com
1
|
▷ |