SPC564A70B4 Datasheet, PDF (1/133 Pages) STMicroelectronics – Up to 4 multiply and accumulate operations per cycle

SPC564A70B4, SPC564A70L7
32-bit Power Architecture^® based MCU for automotive
powertrain applications
Datasheet − preliminary data
Features
■ 150 MHz e200z4 Power Architecture^® core
– Variable length instruction encoding (VLE)
– Superscalar architecture with 2 execution
units
– Up to 2 integer or floating point instructions
per cycle
– Up to 4 multiply and accumulate operations
per cycle
■ Memory organization
– 2 MB on-chip flash memory with ECC and
read-while-write (RWW)
– 128 KB on-chip SRAM with standby
functionality (32 KB) and ECC
– 8 KB instruction cache (with line locking),
configurable as 2- or 4-way
– 14 + 3 KB eTPU code and data RAM
– 4 × 4 crossbar switch (XBAR)
– 24-entry MMU
■ Fail Safe Protection
– 16-entry Memory Protection Unit (MPU)
– CRC unit with 3 submodules
– Junction temperature sensor
■ Interrupt
– Configurable interrupt controller (INTC)
with non-maskable interrupt (NMI)
– 64-channel eDMA
■ Serial channels
– 3 eSCI modules
– 3 DSPI modules (2 of which support
downstream Micro Second Channel [MSC])
– 3 FlexCAN modules with 64 message
buffers each
PBGA324 (23 mm x 23 mm) _{LQFP176 (24 mm x 24 mm)}
– 1 FlexRay module (V2.1) up to 10 Mbit/s
w/dual or single channel, 128 message
objects, ECC
■ 1 eMIOS (24 unified channels)
■ 1 eTPU2 (second generation eTPU)
– 32 standard channels
– 1 reaction module (6 channels with 3
outputs per channel)
■ 2 enhanced queued analog-to-digital
converters (eQADCs)
– Forty 12-bit input channels
– 688 ns minimum conversion time
■ On-chip CAN/SCI Bootstrap loader with Boot
Assist Module (BAM)
■ Nexus: Class 3+ for core; Class 1 for eTPU
■ JTAG (5-pin)
■ Development Trigger Semaphore (DTS)
■ Clock generation
– On-chip 4–40 MHz main oscillator
– On-chip FMPLL (frequency-modulated
phase-locked loop)
■ Up to 112 general purpose I/O lines
■ Power reduction modes: slow, stop, and
standby
■ Flexible supply scheme
– 5 V single supply with external ballast
– Multiple external supply: 5 V, 3.3 V , and
1.2 V
■ Designed for LQFP176, LBGA208, PBGA324
Table 1. Device summary
Memory Flash size
2MB
Package LQFP176
SPC564A70L7
Part number
Package LBGA208
-
Package PBGA324
SPC564A70B4
September 2013
Doc ID 18078 Rev 4
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
1/133
www.st.com
1