|
M50FW016 Datasheet, PDF (1/45 Pages) STMicroelectronics – 16 Mbit 2Mb x8, Uniform Block 3V Supply Firmware Hub Flash Memory | |||
|
M50FW016
16 Mbit (2Mb x8, Uniform Block)
3V Supply Firmware Hub Flash Memory
PRELIMINARY DATA
FEATURES SUMMARY
â SUPPLY VOLTAGE
â VCC = 3 V to 3.6 V for Program, Erase and
Read Operations
â VPP = 12 V for Fast Program and Fast
Erase
â TWO INTERFACES
â Firmware Hub (FWH) Interface for
embedded operation with PC Chipsets
â Address/Address Multiplexed (A/A Mux)
Interface for programming equipment
compatibility
â FIRMWARE HUB (FWH) HARDWARE
INTERFACE MODE
â 5 Signal Communication Interface
supporting Read and Write Operations
â Hardware Write Protect Pins for Block
Protection
â Register Based Read and Write
Protection
â 5 Additional General Purpose Inputs for
platform design flexibility
â Multi-byte Read Operation (4/16/128-
byte)
â Synchronized with 33 MHz PCI clock
â BYTE PROGRAMMING TIME
â Single Byte Mode: 10µs (typical)
â Quadruple Byte Mode: 2.5µs (typical)
â 32 UNIFORM 64 Kbyte MEMORY BLOCKS
â PROGRAM and ERASE SUSPEND
â Read other Blocks during Program/Erase
Suspend
â Program other Blocks during Erase
Suspend
â FOR USE in PC BIOS APPLICATIONS
â ELECTRONIC SIGNATURE
â Manufacturer Code: 20h
â Device Code: 2Eh
Figure 1. Package
TSOP40 (N)
10 x 20mm
July 2004
1/45
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
|
▷ |