|
M50FLW080A Datasheet, PDF (1/64 Pages) STMicroelectronics – 8 Mbit (13 x 64KByte Blocks + 3 x 16 x 4KByte Sectors), 3V Supply Firmware Hub / Low Pin Count Flash Memory | |||
|
M50FLW080A
M50FLW080B
8-Mbit (13 x 64-Kbyte Blocks + 3 Ã 16 Ã 4 Kbyte Sectors)
3-V supply, Firmware Hub / low-pin-count Flash memory
Feature summary
â Flash memory
â Compatible with either the LPC interface or
the FWH interface (Intel Spec rev1.1) used
in PC BIOS applications
â 5-signal communication interface
supporting Read and Write operations
â 5 additional general-purpose inputs for
platform design flexibility
â Synchronized with 33 MHz PCI clock
â 16 blocks of 64 Kbytes
â 13 blocks of 64 Kbytes each
â 3 blocks, subdivided into 16 uniform
sectors of 4 Kbytes each
Two blocks at the top and one at the bottom
(M50FLW080A)
One block at the top and two at the bottom
(M50FLW080B)
â Enhanced security
â Hardware Write Protect pins for block
protection
â Register-based Read and Write Protection
â Individual Lock Register for each 4 KByte
sector
â Supply voltage
â VCC = 3.0 to 3.6 V for Program, Erase and
Read operations
â VPP = 12 V for Fast Program and Erase
â Two interfaces
â Auto Detection of Firmware Hub (FWH) or
Low Pin Count (LPC) memory cycles for
embedded operation with PC chipsets
â Address/Address Multiplexed (A/A Mux)
interface for programming equipment
compatibility.
â Programming time: 10 µs typical
PLCC32 (K)
TSOP32 (NB)
8 Ã 14 mm
TSOP40 (N)
10 Ã 20 mm
â Program/Erase Controller
â Embedded Program and Erase algorithms
â Status Register bits
â Program/Erase Suspend
â Read other Blocks/Sectors during Program
Suspend
â Program other Blocks/Sectors during Erase
Suspend
â ELectronic signature
â Manufacturer Code: 20h
â Device Code (M50FLW080A): 80h
â Device Code (M50FLW080B): 81h
â Packages
â ECOPACK® (RoHS compliant)
October 2006
Rev 4
1/64
www.st.com
1
|
▷ |