BLUENRG-1 Datasheet, PDF (1/173 Pages) STMicroelectronics – Bluetooth low energy wireless system-on-chip

BlueNRG-1
Bluetooth^® low energy wireless system-on-chip
Datasheet - production data
WLCSP34
QFN32
Features
 Bluetooth specification compliant master,
slave and multiple roles simultaneously,
single-mode Bluetooth low energy system-
on-chip
 Operating supply voltage: from 1.7 to 3.6 V
 Integrated linear regulator and DC-DC step-
down converter
 Operating temperature range: -40 °C to 105
°C
 High performance, ultra-low power Cortex-
M0 32-bit based architecture core
 Programmable 160 KB Flash
 24 KB RAM with retention (two 12 KB
banks)
 1 x UART interface
 1 x SPI interface
 2 x I²C interface
 14 or 15 GPIO
 2 x multifunction timer
 10-bit ADC
 Watchdog & RTC
 DMA controller
 PDM stream processor
 16 or 32 MHz crystal oscillator
 32 kHz crystal oscillator
 32 kHz ring oscillator
 Battery voltage monitor and temperature
sensor
 Up to +8 dBm available output power (at
antenna connector)
 Excellent RF link budget (up to 96 dB)
 Accurate RSSI to allow power control
 8.2 mA maximum TX current (@ 0 dBm, 3.0
V)
 Down to 1 µA current consumption with
active BLE stack (sleep mode)
 Compliant with the following radio frequency
regulations: ETSI EN 300 328, EN 300 440,
FCC CFR47 Part 15, ARIB STD-T66
 Pre-programmed bootloader via UART
 QFN32, WCSP34 package option
 Dedicated wettable flank QFN package for
automotive grade qualification
Applications
 Automotive product
 Watches
 Fitness, wellness and sports
 Consumer medical
 Security/proximity
 Remote control
 Home and industrial automation
 Assisted living
 Mobile phone peripherals
 Lighting
 PC peripherals
Table 1: Device summary table
Order code
Package
Packing
BLUENRG-132
QFN32
(5 x 5 mm)
Tape and reel
BLUENRG-134
WLCSP34
Tape and reel
BLUENRG-132Y
QFN32
(5 x 5 mm)
Automotive
grade Level
Tape and reel
June 2016
DocID028866 Rev 1
This is information on a product in full production.
1/173
www.st.com