AN4128 Datasheet, PDF (1/28 Pages) STMicroelectronics – This document describes the STEVAL-SPBT4ATV3 demonstration board

AN4128
Application note
Demonstration board for Bluetooth^® module class 1
SBT2632C1A.AT2
Introduction
This document describes the STEVAL-SPBT4ATV3 demonstration board (dongle) for the
Bluetooth^® class 1 SPBT2632C1A.AT2 module.
The dongle includes the module under evaluation, an RF antenna, and a USB connector.
The USB connector is used to connect the dongle with a PC, to access the Bluetooth
module and to supply the dongle.
The STEVAL-SPBT4ATV3 is an easy solution to test and operate with the
SPBT2632C1A.AT2 module and to familiarize the user with the embedded FW which
enables the creation of a Bluetooth link with simple AT commands. The AT command list is
detailed in the UM1547 user manual.
This document introduces the main technical characteristics of the dongle and includes a
quick start guide to get started with STEVAL-SPBT4ATV3.
Dongle features:
■ Based on V3.0 Bluetooth class 1 module, SPBT2632C1A.AT2
■ USB interface and power supply
■ Supported reprogrammability via USB interface
■ Reset button
■ Antenna onboard
■ RoHS compliant
Figure 1. STEVAL-SPBT4ATV3 dongle
June 2012
Doc ID 023306 Rev 1
AM12672V1
1/28
www.st.com