S29GL256P90TFCR20 Datasheet, PDF (53/81 Pages) SPANSION – MirrorBit® Flash Family

Data Sheet
11. Electrical Specifications
11.1
Absolute Maximum Ratings
Description
Storage Temperature, Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground
Output Short Circuit Current (Note 3)
All Inputs and I/Os except as noted below
(Note 1)
V_CC (Note 1)
V_IO
A9 and ACC (Note 2)
Rating
–65°C to +150°C
–65°C to +125°C
–0.5 V to V_CC + 0.5 V
–0.5 V to +4.0 V
–0.5V to +4.0V
–0.5 V to +12.5 V
200 mA
Notes
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs or I/Os may undershoot V_SS to –2.0 V for periods of up
to 20 ns. See Figure 11.1. Maximum DC voltage on input or I/Os is V_CC + 0.5 V. During voltage transitions inputs or I/Os may overshoot to
V_CC + 2.0 V for periods up to 20 ns. See Figure 11.2.
2. Minimum DC input voltage on pins A9 and ACC is -0.5V. During voltage transitions, A9 and ACC may overshoot V_SS to –2.0 V for periods
of up to 20 ns. See Figure 11.1. Maximum DC voltage on pins A9 and ACC is +12.5 V, which may overshoot to 14.0 V for periods up to 20
ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only;
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
Figure 11.1 Maximum Negative Overshoot Waveform
+0 .8 V
20 ns
20 ns
–0 .5 V
–2 .0 V
20 n s
Figure 11.2 Maximum Positive Overshoot Waveform
V_CC
+2.0 V
V_CC
+0.5 V
+2.0 V
20 ns
20 ns
20 ns
October 22, 2012 S29GL-P_00_A14
S29GL-P MirrorBit^® Flash Family
53