S29GL256P90TFCR20 Datasheet, PDF (18/81 Pages) SPANSION – MirrorBit® Flash Family

Data Sheet
6. Product Overview
The S29GL-P family consists of 1 Gb, 512 Mb, 256 Mb and 128 Mb, 3.0-volt-only, page mode Flash devices
optimized for today’s embedded designs that demand a large storage array and rich functionality. These
devices are manufactured using 90 nm MirrorBit technology. These products offer uniform 64 Kword
(128 Kbyte) uniform sectors and feature VersatileIO control, allowing control and I/O signals to operate from
1.65 V to V_CC. Additional features include:
 Single word programming or a 32-word programming buffer for an increased programming speed
 Program Suspend/Resume and Erase Suspend/Resume
 Advanced Sector Protection methods for protecting sectors as required
 128 words/256 bytes of Secured Silicon area for storing customer and factory secured information. The
Secured Silicon Sector is One Time Programmable.
6.1
Memory Map
The S29GL-P devices consist of uniform 64 Kword (128 Kbyte) sectors organized as shown in Table 6.1–
Table 6.4.
Table 6.1 S29GL01GP Sector & Memory Address Map
Uniform Sector
Size
Sector
Count
Sector
Range
Address Range (16-bit)
Notes
64 Kword/
128 Kbyte
1024
SA00
:
SA1023
0000000h - 000FFFFh
:
3FF0000H - 3FFFFFFh
Sector Starting Address
Sector Ending Address
Note
This table has been condensed to show sector-related information for an entire device on a single page. Sectors and their address ranges
that are not explicitly listed (such as SA001-SA1022) have sector starting and ending addresses that form the same pattern as all other
sectors of that size. For example, all 128 Kb sectors have the pattern xxx0000h-xxxFFFFh.
Table 6.2 S29GL512P Sector & Memory Address Map
Uniform Sector
Size
Sector
Count
Sector
Range
Address Range (16-bit)
Notes
64 Kword/
128 Kbyte
SA00
512
:
SA511
0000000h - 000FFFFh
:
1FF0000H - 1FFFFFFh
Sector Starting Address
Sector Ending Address
Note
This table has been condensed to show sector-related information for an entire device on a single page. Sectors and their address ranges
that are not explicitly listed (such as SA001-SA510) have sector starting and ending addresses that the same pattern as all other sectors of
that size. For example, all 128 Kb sectors have the pattern xxx0000h-xxxFFFFh.
Table 6.3 S29GL256P Sector & Memory Address Map
Uniform Sector
Size
Sector
Count
Sector
Range
Address Range (16-bit)
Notes
64 Kword/
128 Kbyte
SA00
256
:
SA255
0000000h - 000FFFFh
:
0FF0000H - 0FFFFFFh
Sector Starting Address
Sector Ending Address
Note
This table has been condensed to show sector-related information for an entire device on a single page. Sectors and their address ranges
that are not explicitly listed (such as SA001-SA254) have sector starting and ending addresses that form the same pattern as all other
sectors of that size. For example, all 128 Kb sectors have the pattern xxx0000h-xxxFFFFh.
18
S29GL-P MirrorBit^® Flash Family
S29GL-P_00_A14 October 22, 2012