C-13-2500-F-SLC Datasheet, PDF (5/8 Pages) Source Photonics, Inc. – 2.5Gbps Single Mode SFF LC Transceiver (SR)

2.5Gbps Single Mode SFF LC Transceiver (SR)
C-13-2500/C-F-SLC
SIGNAL DETECT
The C-13-2500-F-SLC/C-13-2500C-F-SLC
transceivers are equipped with LVTTL / LVPECL
signal detect outputs. The standard LVTTL
output eliminates the need for a LVPECL to
LVTTL level shifter in most applications.
POWER COUPLING
A suggested layout for power and
ground connections is given in figure
4B below. Connections are made via
separate voltage and ground planes.
The mounting posts are at case ground
and should not be connected to circuit
ground. The mounting posts are at
case gound and should not be
connected to circuit ground. The ferrite
gead should provide a real impedance
of 50 to 100 ohms at 100 to
1000MHz. Bypass capacitors should
be placed as close to the 10-pin
connector as possible.