ICX062AL Datasheet, PDF (4/16 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA B/W Video Camera

ICX062AL
DC Characteristics
Item
Symbol Min. Typ. Max. Unit Remarks
Output amplifier drain current
IDD
Input current
IIN1
Input current
IIN2
5
mA
1
µA ^∗3
10
µA ^∗4
∗1 _{Indications of substrate voltage (VSUB) and reset gate clock voltage (VRGL) setting value}
The setting value of the substrate voltage and reset gate clock voltage are indicated on the back of the
image sensor by a special code. Adjust the substrate voltage (VSUB) and reset gate clock voltage (VRGL) to
the indicated voltage. The adjustment accuracy is ±3%.
VSUB code – one character indication
VRGL code – one character indication
↑↑
VRGL code VSUB code
"Code" and optimal setting correspond to each other as follows.
VRGL code
123 4567
Optimal setting 0 0.5 1.0 1.5 2.0 2.5 3.0
VSUB code
D E f G h J K L mN P Q R S T U VWX Y Z
Optimal setting 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.014.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0
<Example> "5K"→ VRGL = 2.0V
VSUB = 12.0V
∗2 _{This must no exceed the VVL voltage of the vertical clock waveform.}
∗3 _{1) Current to each pin when 20V is applied to VDD, RD, VOUT, Vss, HIS, and SUB pins, while pins that are}
not tested are grounded.
2) Current to each pin when 20V is applied sequentially to Vφ1, Vφ2, Vφ3, Vφ4, Hφ1, and Hφ2 pins, while pins
that are not tested are grounded. However, 20V is applied to SUB pin.
3) Current to each pin when 15V is applied sequentially to RG and VGG pins, while pins that are not tested
are grounded. However, 15V is applied to SUB pin.
4) Current to VL pin when 30V is applied to all pins except the pin being tested and when VL pin is
grounded. However, GND and SUB pins are left open.
∗4 _{Current to SUB pin when 55V is applied to SUB pin, while pins that are not tested are grounded.}
–4–