ICX062AL Datasheet, PDF (1/16 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA B/W Video Camera

ICX062AL
Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA B/W Video Camera
Description
The ICX062AL is an interline CCD solid-state
image sensor suitable for EIA black-and-white video
cameras with a diagonal 11mm (Type 2/3)
system.
High sensitivity is achieved by adopting HAD (Hole-
Accumulation Diode) sensors. The chip features a
field period readout system and an electronic shutter
with variable charge-storage time.
20 pin DIP (Ceramic)
Features
• High resolution
• Low smear
Pin 1
2
• High sensitivity, low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
V
8
Device Structure
• Image size:
Diagonal 11mm (Type 2/3)
3
H
55
Pin 11
• Number of effective pixels: 980 (H) × 494 (V), approx. 480K pixels
• Total number of pixels: 1038 (H) × 504 (V), approx. 520K pixels
Optical black position
• Interline CCD image sensor
(Top View)
• Chip size:
10.75mm (H) × 8.7mm (V)
• Unit cell size:
9.3µm (H) × 13.6µm (V)
• Optical black:
Horizontal (H) direction; front 3 pixels, rear 55 pixels
• Number of dummy bits:
Vertical (V) direction;
Horizontal 25
front 8 pixels, rear 2 pixels
• Substrate material:
Vertical 1 (even fields only)
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95632D99