ICX282AKF Datasheet, PDF (13/48 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras

ICX282AKF
2× speed mode (2) 2-line addition
1st field
2nd field
17 (V1A)
G
16 (V3B)
Ye
15 (V1B)
G
14 (V3A)
Ye
13 (V1C)
G
12 (V3B)
Ye
11 (V1B)
G
10 (V3A)
Ye
9 (V1C)
G
8 (V3B)
Ye
7 (V1B)
G
6 (V3C)
Ye
5 (V1A)
G
4 (V3B)
Ye
3 (V1B)
G
2 (V3C)
Ye
1 (V1A)
G
VOUT
Mg
17 (V1A)
G
Cy
16 (V3B)
Ye
Mg
15 (V1B)
G
Cy
14 (V3A)
Ye
Mg
13 (V1C)
G
Cy
12 (V3B)
Ye
Mg
11 (V1B)
G
Cy
10 (V3A)
Ye
Mg
9 (V1C)
G
Cy
8 (V3B)
Ye
Mg
7 (V1B)
G
Cy
6 (V3C)
Ye
Mg
5 (V1A)
G
Cy
4 (V3B)
Ye
Mg
3 (V1B)
G
Cy
2 (V3C)
Ye
Mg
1 (V1A)
G
VOUT
8× speed mode
4/16-line readout
Mg
17 (V1A)
G
Mg
Cy
16 (V3B)
Ye
Cy
Mg
15 (V1B)
G
Mg
Cy
14 (V3A)
Ye
Cy
Mg
13 (V1C)
G
Mg
Cy
12 (V3B)
Ye
Cy
Mg
11 (V1B)
G
Mg
Cy
10 (V3A)
Ye
Cy
Mg
9 (V1C)
G
Mg
Cy
8 (V3B)
Ye
Cy
Mg
7 (V1B)
G
Mg
Cy
6 (V3C)
Ye
Cy
Mg
5 (V1A)
G
Mg
Cy
4 (V3B)
Ye
Cy
Mg
3 (V1B)
G
Mg
Cy
2 (V3C)
Ye
Cy
Mg
1 (V1A)
G
Mg
VOUT
Note) Blacked out portions in the diagram indicate pixels which are not read out.
3. 2× speed mode (2) 2-line addition
In this mode, the G/Mg line is read out in the 1st field and the Ye/Cy line in the 2nd field, 2 lines are
transferred during the horizontal blanking period, and 2 lines are added in the horizontal register.
All pixel signals are divided into two fields and output in approximately half the time (slightly longer than half)
of frame readout mode.
At this time, the sensitivity (for 1/30s accumulation) and saturation signal level are double that during frame
readout mode, allowing high sensitivity imaging with a wide dynamic range.
4. 8× speed mode, 4/16-line readout
All effective area signals are output in 1/8 the time of frame readout mode by reading out 4 lines for every 16
lines, transferring 4 lines during the horizontal blanking period, and adding 2 lines in the horizontal register.
The number of output lines is 245 lines.
However, note that the G/Mg and Ye/Cy line readout timings have a time difference of approximately 6.7µs
(150clk).
This mode emphasizes processing speed over vertical resolution, making it suitable for AE/AF and other
control and for image verification on LCD viewfinders.
– 13 –