CXD3017Q Datasheet, PDF (1/117 Pages) Sony Corporation – CD Digital Signal Processor with Built-in Digital Servo and DAC

CXD3017Q
CD Digital Signal Processor with Built-in Digital Servo and DAC
Description
The CXD3017Q is a digital signal processor LSI for
CD players. This LSI incorporates a digital servo,
digital filter, zero detection circuit, 1-bit DAC and
analog low-pass filter.
80 pin LQFP (Plastic)
Features
Digital Signal Processor (DSP) Block
• 1×, 2×, 4× speed playback supported
• 16K-RAM
• EFM data demodulation
• Enhanced EFM frame sync signal protection
• SEC strategy-based error correction
• Subcode demodulation and Sub Q data error
detection
• Digital spindle servo
• 16-bit traverse counter
• Asymmetry compensation circuit
• CPU interface on serial bus
• Error correction monitor signal, etc. output from a
new CPU interface
• Servo auto sequencer
• Digital audio interface outputs
• Digital level meter, peak meter
• CD TEXT data demodulation
Digital Servo (DSSP) Block
• Microcomputer software-based flexible servo control
• Offset cancel function for servo error signal
• Auto gain control function for servo loop
• E:F balance, focus bias adjustment function
• Surf jump function supporting micro two-axis
• Tracking filter: 6 stages, focus filter: 5 stages
Digital Filter, DAC and Analog Low-pass Filter Blocks
• DBB (digital bass boost) function
• Double-speed playback supported
• Digital de-emphasis
• Digital attenuation
• 8Fs oversampling filter
Applications
CD players
Structure
Silicon gate CMOS IC
Absolute Maximum Ratings
• Supply voltage VDD
–0.5 to +4.6 V
• Input voltage
VI
–0.5 to +4.6 V
(VSS – 0.5V to VDD + 0.5V)
• Output voltage VO
–0.5 to +4.6 V
(VSS – 0.5V to VDD + 0.5V)
• Storage temperature Tstg
–55 to +150 °C
• Supply voltage difference
VSS – AVSS –0.3 to +0.3 V
VDD – AVDD –0.3 to +0.3 V
Note) AVDD includes XVDD and AVSS includes XVSS.
Recommended Operating Conditions
• Supply voltage VDD
2.7 to 3.6 V
• Operating temperature
Topr
–20 to +75 °C
Playback
speed
4×
2×
1×
VDD [V]
CD-DSP block DAC block
2.7 to 3.6
2.7 to 3.6
2.7 to 3.6
2.7 to 3.6
2.7 to 3.6
I/O Capacitance
• Input pin
CI
9 (Max.) pF
• Output pin
CO
11 (Max.) pF
• I/O pin
CI/O
11 (Max.) pF
Note) Measurement conditions VDD = VI = 0V
fM = 1MHz
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E99Y24-PS