LAN9217 Datasheet, PDF (115/134 Pages) SMSC Corporation – 16-bit High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX

16-bit High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX
Datasheet
5.5.10 Special Control/Status Indications
Index (In Decimal):
27
Size:
16-bits
ADDRESS
DESCRIPTION
MODE DEFAULT
15
14
13
12:11
10
9-5
4
3:0
Override AMDIX Strap
0 - AMDIX_EN (pin 73) enables or disables HP Auto MDIX
1 - Override pin 73. PHY Register 27.14 and 27.13 determine MDIX
function
Auto-MDIX Enable: Only effective when 27.15=1, otherwise ignored.
0 = Disable Auto-MDIX. 27.13 determines normal or reversed connection.
1 = Enable Auto-MDIX. 27.13 must be set to 0.
Auto-MDIX State. Only effective when 27.15=1, otherwise ignored.
When 27.14 = 0 (manually set MDIX state):
0 = no crossover (TPO = output, TPI = input)
1 = crossover (TPO = input, TPI = output)
When 27.14 = 1 (automatic MDIX) this bit must be set to 0.
Do not use the combination 27.15=1, 27.14=1, 27.13=1.
Reserved: Write as 0. Ignore on read.
VCOOFF_LP: Forces the Receive PLL 10M to lock on the reference clock
at all times:
0 - Receive PLL 10M can lock on reference or line as needed (normal
operation)
1 - Receive PLL 10M is locked on the reference clock.
In this mode 10M data packets cannot be received.
Reserved: Write as 0. Ignore on read.
XPOL: Polarity state of the 10Base-T:
0 - Normal polarity
1 - Reversed polarity
Reserved: Read only - Writing to these bits have no effect.
RW
RW
RW
RW
RW,
NASR
RW
RO
RO
0
0
0
0
0
0
0
1011b
SMSC LAN9217
115
DATASHEET
Revision 1.5 (07-18-06)