SKY16602-632LF Datasheet, PDF (7/11 Pages) Skyworks Solutions Inc. – Low limiting threshold

DATA SHEET ● SKY16602-632LF: LOW-THRESHOLD PIN DIODE LIMITER
Evaluation Board Description
The SKY16602-632LF evaluation boards are used to test the
performance of the limiter. Assembly drawings for the
evaluation boards are shown in Figures 10 and 11. The
evaluation board layer detail is provided in Figure 12.
Package Dimensions
The PCB layout footprint for the SKY16602-632LF is shown in
Figure 13. Typical part markings are noted in Figure 14.
Package dimensions are shown in Figure 15, and tape and reel
dimensions are provided in Figure 16.
Package and Handling Information
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY16602-632LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application
Note, Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
202945E-010
Figure 10. SKY16602-632LF Evaluation Board Assembly Diagram
202945E-011
Figure 11. SKY16602-632LF Evaluation Board Assembly Diagram (Tuned Circuit)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202945F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 11, 2016
7