SKY13524-639LF Datasheet, PDF (5/10 Pages) Skyworks Solutions Inc. – 0.7 to 3.0 GHz High Isolation SP4T Switch

DATA SHEET • SKY13524-639LF: HIGH ISOLATION SP4T SWITCH
Evaluation Board Description
The SKY13524-639LF Evaluation Board is used to test the
performance of the SKY13524-639LF SP4T Switch. An Evaluation
Board schematic diagram is provided in Figure 3. An assembly
drawing for the Evaluation Board is shown in Figure 4.
Package Dimensions
The PCB layout footprint for the SKY13524-639LF is provided in
Figure 5. Typical case markings are shown in Figure 6. Package
dimensions for the 14-pin QFN are shown in Figure 7, and tape
and reel dimensions are provided in Figure 8.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY13524-639LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
RF1
C4
47 pF
14
RF1
1 _GND
GND
RFC
2 _RFC
C1
10 nF
3 _VDD
4 _GND
GND
RF4
5
RF4
C2
47 pF
13
GND
GND
6
GND
12
RF2
RF2
C5
47 pF
GND ¹¹
GND
V1 ¹⁰
V2 ⁹
N/C ⁸
RF3
7
RF3
C3
47 pF
GND
Figure 3. SKY13524-639LF Evaluation Board Schematic
DCH1 Header
4 _GND
3 _V1
2 _V2
1 _VDD
ts185
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202801C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 2, 2015
5