SKY13524-639LF Datasheet, PDF (3/10 Pages) Skyworks Solutions Inc. – 0.7 to 3.0 GHz High Isolation SP4T Switch

DATA SHEET • SKY13524-639LF: HIGH ISOLATION SP4T SWITCH
Functional Description
The SKY13524-639LF includes an internal decoder and internal
blocking capacitors on the RF common ports. External DC
blocking capacitors are required on the RF1, RF2, RF3, and RF4
ports for proper operation. DC decoupling capacitors may be
added on the VDD and control lines if necessary.
Switching is controlled by two control voltage inputs, V1 and V2.
Depending on the logic voltage level applied to the control pins,
the antenna pin is connected to one of four switched RF outputs.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13524-639LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
The state of the SKY13524-639LF is determined by the logic
shown in Table 4.
Table 2. SKY13524-639LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage
VDD
3.7
V
Control voltage (V1, V2)
VCTL
–0.5
+3.3
V
RF input power
PIN
+26
dBm
Operating temperature
TOP
–30
+90
C
Storage temperature
TSTG
–55
+150
C
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202801C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 2, 2015
3