SKY13524-639LF Datasheet, PDF (1/10 Pages) Skyworks Solutions Inc. – 0.7 to 3.0 GHz High Isolation SP4T Switch

DATA SHEET
SKY13524-639LF: 0.7 to 3.0 GHz High Isolation SP4T Switch
Applications
 CDMA/WCDMA/TD-SCDMA/LTE single-ended filter switching
Features
 Broadband frequency range: 0.7 to 3.0 GHz
 High isolation: 47 dB @ 2.0 GHz (typical)
 Small QFN (14-pin, 1.6 x 1.6 mm) package
(MSL1, 260 C per JEDEC J-STD-020)
Skyworks Green^TM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green^TM, document number
SQ04–0074.
RF1
RF2
RFC
RF3
RF4
Logic and Supply
Figure 1. SKY13524-639LF Block Diagram
Description
The SKY13524-639LF is a single-pole, four-throw (SP4T) switch
used for single-ended filter switching in cellular applications. The
SKY13524-639LF maintains low insertion loss and high isolation
for all switching paths.
Depending on the logic voltage level applied to the control pins
(V1 and V2), the RFC pin is connected to one of four switched RF
outputs (RF1 to RF4) using a low insertion loss path, while the
paths between the RFC pin and the other RF pins are in a high
isolation state.
The SKY13524-639LF is manufactured in a compact, 14-pin
1.6 x 1.6 mm, Quad Flat No-Lead (QFN) package. A functional
block diagram is shown in Figure 1. The pin configuration and
package are shown in Figure 2. Signal pin assignments and
functional pin descriptions are provided in Table 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202801C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 2, 2015
1