SKY77433 Datasheet, PDF (4/11 Pages) Skyworks Solutions Inc. – Front-End Module for WCDMA / HSDPA / HSUPA (Tx 1920-1980 MHz), (Rx 2110-2170 MHz)

PRELIMINARY DATA SHEET
SKY77433 FRONT-END MODULE FOR WCDMA / HSDPA / HSUPA
TX (1920-1980 MHz), RX (2110-2170 MHz)
Table 3. Electrical Specifications for Nominal Operating Conditions ¹ (2 of 2)
[continued] WCDMA (Wide Band Code Division Multiple Access)
Parameter
Symbol
Conditions
Minimum Typical Maximum
Unit
Tx Noise Power in Rx Band
NRx1
PMAX1
869–894 MHz
RBW = 3.84 MHz
—
—
–61
dBm
NRx2
PMAX1
1575.42 MHz
RBW = 2.046 MHz
—
—
–100
NRx3
PMAX1
1884.5–1879.9 MHz
RBW = 3.84 MHz
—
—
–61
NRx4
PMAX1
2110–2170 MHz
RBW = 3.84 MHz
—
—
–114
NRx5
PMAX1
2400–2483.5 MHz
RBW = 1.0 MHz
—
—
–90
NRx6
PMAX1
921–925 MHz
RBW = 100 kHz
—
—
–61
NRx7
PMAX1
925–935 MHz
RBW = 2.046 MHz
—
—
–61
NRx8
PMAX1
1805–1881 MHz
RBW = 3.84 MHz
—
—
–72
NRx9
PMAX1
1893.5–1919.6 MHz
RBW = 3.84 MHz
—
—
–42
Input Voltage Standing Wave Ratio
VSWR
—
—
—
2:1
Quiescent Current
ICQ
—
—
—
25
mA
Control Current
ICONT
—
—
—
1
mA
Digital Enable Current
IEN
—
—
—
1
mA
Leakage Current
ILEAK
VCC1, VCC2, VBIAS = 4.45 V
VCONT = 0 V
VEN = 0 V
VMODE = 0 V
—
—
20
μA
Stability (spurious output)
Ruggedness – no damage ⁴
S
8:1 VSWR, all phases
Ru
—
—
—
10:1
—
–65
dBc
—
1 _{Unless otherwise specified: VCC = 3.4 V, Temp. = 25 °C.}
2 _{For STC1 WCDMA, STC2 HSDPA, and STC3 HSUPA modes test conditions. For STC4 HSUPA, power backoff = 2.6 dB.}
3 _{ACLR is specified per 3GPP as the ratio of in-band power to adjacent power, both measured in 3.84 MHz bandwidth at specified offsets.}
4 _{All phases, time = 10 seconds, continuous WCDMA/HSDPA modulated signal, VCC = 4.7 V, PO = PMAX1 + 1.5 dB, PIN_MAX = +10 dBm.}
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
4
December 8, 2008 • Skyworks Proprietary and Confidential Information. • Products and product information are subject to change without notice. • 200595B